View Single Post
  #12   Report Post  
Old 11-08-2006, 06:46 PM posted to rec.gardens.edible
cloud dreamer[_1_] cloud dreamer[_1_] is offline
external usenet poster
 
First recorded activity by GardenBanter: Jul 2006
Posts: 15
Default Potatoes in Containers

OmManiPadmeOmelet wrote:

In article ,
cloud dreamer wrote:


You could also use a large tomato cage instead of tires and the excess
water
would run off. I used tires once and they rotted also.



Perhaps punch several holes in the (bottom-facing) sidewall of
the tyres?


Tried it. With the tires piled on each other, it was near impossible to
ensure all the water was out. I used a 1/2 inch spatula type drill bit
to punch large holes in the sides and treads. No go and it wasn't easy
work.

In the end, I would have been better off getting out the circular saw,
cutting a piece of 2x8 untreated lumber into 2 foot sections and nailing
them together...then piling them up 16, 24 or 32 inches high. It would
have taken ten minutes and cost less than $20 for the wood - and the
assembly would have been reuseable.

I plan to try that technique next year.



I wonder how well using plastic lattice would work?
Wood lattice would rot.



I'm not talking lattice. I'm talking about 2x8s - solid lumber. With
proper drainage, it would take 15-20 years for it to rot. (Longer if you
took it apart every year (to get at the potatoes) and restacked them in
a different order).

..

Zone 5a in Canada's Far East.