Thanks everybody for all your input. Some good ideas.All i have to do now is
put it to some good use.

Alan R

"shazzbat" wrote in message
...

"®óñ© © ² * ¹°°³" wrote in message
...
On 31 Aug 2006 04:21:15 -0700, wrote and
included this (or some of this):


Alan R wrote:
Hi. I have just been given a 10x8 aluminium greenhouse and would like
to
know what type of base is best to put it on. Brick, block, metal etc
etc.

Also i have seen some GH's on a metal frame, any good? where can i get
one?

Thanks all

Where will you put it? If you want to put it on an area that is now
just grass or soil, then I can describe what was done to install our
greenhouse (a builder came and did it; he was recommended by the
greenhouse supplier; that proves nothing and could be the wrong thing
to do but I can describe it anyway).

He dug a shallow trench around the boundary of the plot; this was only
a few inches deep and less than a foot wide; He made sure it was
roughly level and he filled that with conctrete which he also made sure
was level. When the concrete was set he laid concrete blocks on their
sides so that a 12x8 foot greenhouse base would fit along the centres
of the blocks. These were mortared in and when they were set the
greenhouse base was fixed to it using rawlplugs and screws.

For a greenhouse that size, it has to be fixed to something very level
(or glass will not fit well) and very heavy so it will not blow away.

I agree it does need fixing to the (level) base, but huge bolts are
not required in my opinion. Screws into rawlplugs every 2' are fine.
A 10'x8' GH is *very heavy once all the glass is installed.


Before glazing it, pour some water in the guttering half way along, make
sure it comes off at the end you want it to. If the GH is perfectly level,
then no problem, blocking up one end will make the water come off the
other end, but few are that level. It's not so critical that you can't
make an adjustment.

Steve