"NWalch" wrote in message
m...
I've just checked the diameter of the sleepers and its 260mm by 160mm
approx. If the circular saw has a cutting depth of 65mm (which seems
to be the usual max) then would this go through (65mm from each side
would leave 30mm in the middle).


Nick

You can get circular saws with 3" cutting depth if you shop around - mine from
Wickes is 3". If that's not quite deep enough, you could always use a hand saw to
finish the job off - there wouldn't be much left to cut through.
--
Drakanthus.


(Spam filter: Include the word VB anywhere in the subject line or emails
will never reach me.)