On 6 May, 10:12, Dave Fawthrop
wrote:
On Sun, 06 May 2007 09:07:01 +0100, judith wrote:

|!I had really struggled to find some long (three quarter inch) cropped
|!bolts.

When I was an apprentice mumble years ago I *made* a tool to do this,
unfortunately metrication has made them useless. Must make a metric one.

Drill and tap a hole in a 1/4 inch thick bit if mild steel about 1 inch
wide. Saw through centre of the hole, lengthwise in mild steel. Put long
bolt in tapped hole. Put tool in vice squeezing shut saw cut. Hacksaw
bolt to length as required.
--
Dave Fawthrop sf hyphenologist.co.uk 165 *Free* SF ebooks.
165 Sci Fi books on CDROM, from Project Gutenberghttp://www.gutenberg.org/wiki/Main_PageCompletely Free to any
address in the UK. Contact me on the *above* email address.

Terry clearly isn't a gardener with greenhouse as he would have
recognised what Judith is talking about. These are Aluminium bolts
which can fit into a slot in the Aluminium extrusion of the G/H frame
and lock in place when turned through 90 degrees and the nut
tightened.

Whereas Judith's source may be a good price I've always found them
available at the bigger B &Q and good garden centres.

Rob