"George" wrote in
:

You should be able to bond a piece of stiff flat plastic over the
holes with 5 minute epoxy. Make sure all surfaces to be bonded are
spotlessly cleaned. Be sure to apply pressure while the piece is
bonding. And then allow the epoxy to dry for at least 24 hours before
you get it wet.

George

AH! That I can find and do.... Thanks!

~~Bryan

--
************************************************** **********
* Can't see the Forest | Bryan B. *
* Through the Trees? | Reply if you want. E-mail *
* Take it out! | address changes frequently *
* (Damn Viruses!) | to foil spambots. *
************************************************** **********