Connecting Two Water Barrels (Butts)
Dave Liquorice wrote:
On Thu, 01 Apr 2010 16:19:44 +0100, Rusty Hinge wrote:
Just join the bottoms of the two butts ...
Another snag with fitting tank connectors at the bottom of a butt is
having access to both sides at the same time to hold the connector
inside and screw the nut on the outside if the butt is more than a
couple of feet deep. I managed it for our 4' deep butt when replacing
the crappy, broken, plastic tap, with a 15mm full bore 1/4 turn valve
and proper plumbing bits but it was "fun".
I'll bet! I've a little helper to drop in - he's good with mechanical
things...
But expensive.
--
Rusty
|