Jake Nospam@invalid wrote:
On Tue, 29 Mar 2011 15:24:35 +0100, "mark"
wrote:


"mark" wrote in message
...
I've borrowed a petrol chainsaw and offered to replace the cutting chain
as part of the deal.
It is not one of the main brands. Not done this before so is it just a
matter of getting a replacement chain the same length or is there
something else I need to look out for?

mark


ooops...meant this to go to DIY group.

mark

Rather than replacement, have you considered resharpening the existing
blade - it's more environment friendly and a lot cheaper. Most
chainsaw blades can be resharpened to "as good as new" state about 8
times.

Best place to start is finding a company near you that services lawn
mowers and the like - they'll usually handle the resharpening job as
well or will know someone who can. Worth a try at least.

Where I live, a local company will resharpen my chain for about £6
compared to about £19 for a new chain.

The company I recommended does sharpening, but it's a good idea to
have a spare chain (or two) so that when you're using the saw you can
just change the chain if it gets blunt and then sharpen them at
leisure later.

--
Chris Green