"alan.holmes" wrote in message
...
"Pam Moore" wrote in message
...
On Sun, 5 Jun 2011 12:54:35 +0100, "MuddyMike"
wrote:
There has been talk here in the past of how to remove tree stumps, well I
have just done one.
Having replaced the mower with slightly wider model an old stump was in
the
way so I decided to attack it with an old wood chisel and hammer. Despite
the stump being very hard wood half an hour with the chisel did enough
damage to get the mower through. I will attack the rest some other time
and
reduce the whole thing to below ground level. I found that working in
from
the sides was the best approach.
This and the next two pictures show what I achieved in about half an
hour.
http://share.ovi.com/media/Muddymike...uddymike.10808
Mike
Well done. Now you can come and do mine!!!
After he has done mine!
As mentioned elsewhere, there is no substitute for a good mattock.
A couple of minutes with a mattock should shift that much root.
However if you already have the hammer and chisel it is probably more cost
effective :-)
--
No plan survives contact with the enemy.
[Not even bunny]
Helmuth von Moltke the Elder
(\__/)
(='.'=)
(")_(")