DIY and PH and Aquaclear
Unfortunately, I cannot raise the water level any higher without it touching
the glass top. If I was absolutely sure that is would help, I would get a
canister filter.
Actually I have an eheim doing nothing, but I need to get the tubing, intake
and output parts.
"Robert Flory" wrote in message
gy.com...
"Henry" wrote in message
...
Frank wrote:
Does anybody (successfully) inject C02 using a power filter, or is a
canister\a necessity?
---- Henry
I do just fine with a Emperor 280 on a 55, a whisper 10-20 on a 29 and a
tiny thing on a 10 gallon. I maintain between they run 15+, 15+ and 24+
PPM
respectively. All three have water levels above the lip on the discharge
chute. I use DIY, 2L/1gal , 2 2L, 2 2qrt bottles respectively.
I run things pretty wide open to maintain these levels.
Bob
|