My mower is four seasons old. A Poulan 17.5 HP, 42, " 6 speed, model
PO 17542LT
Last year I began to notice that the mower would delay taking off in
the higher gears. I had to start in the lower gears and then shift
into the higher gears after the mower started moving.

Now the problem is getting worse and the mower will hardly move at all
going up an incline. The engine sounds normal. Doesn't make any change
in sound when under load, sitting still or going at a good speed on
level ground. Oil, all filters changed, and clean.

I was wondering if the problem could be the motion drive belt. It is
supposed to be changed after about 100 hours of use, and that is about
right for this mower. But to change the belt, I have to remove the
"mower" part to get access to the belt.

Sooooo! Is the symptom of the problem that I am describing relevant to
the belt that I mentioned, OR could the symptom be something else
wrong. I would like to fix the problem without having to pull of the
entire mower