Peter Jason wrote:
On Tue, 11 Dec 2012 13:54:39 +1100, "David
Hare-Scott" wrote:

Peter Jason wrote:
I have a plant that likes a pH of 5.5.

Can I just use a potassium phosphate buffer
adjusted to this value to water the plant with?

Peter

My TOTH answer is probably not as buffer solutions are designed to
hold pH steady not to alter it but it might do some good depending
on the situation. I am guessing that you want to lower the pH in
which case the traditional method is to add elemental sulphur and
wait.

What exactly is the content of this buffer solution? What is the pH
of the soil now? How much soil do you want to amend? What is the
soil like, as in how much clay and organic material is there
compared to sand and grit?


David

I have one of these
http://en.wikipedia.org/wiki/File:Wo...bilis_fg03.JPG
that is doing rather well in a large pot, but it
will need transplanting out next season.
I mix my soil 50:50 from two types; an industrial
heavy clay from a dirt road that has been sloughed
up by large turning trucks (easy to dig), and the
usual sandy stuff collected from the roof
guttering and yard sweepings.

I fertilize with cow & chicken manure.

I could make & adjust the buffer from KOH & Phos
Acid with a pH meter, and I have some flowers of
sulfur. How does one test the pH of soil?

My assumption that you want to lower pH is clearly wrong as at this point
you don't know that, so hold on to the sulphur.

The most reliable cheap way to test soil pH is with a dye indicator. You
can get a kit with the dye, colour reference card etc for about $20 and that
will do hundreds of tests. I am puzzled that you know what a buffer is and
how to make it but you are charging off to alter your soil chemistry without
first finding out if it is required.

I am so happy that my roof gutters don't collect enough sand to be useful to
make soil. :-)


D