View Single Post
  #4   Report Post  
Old 22-06-2013, 10:23 PM posted to uk.rec.gardening
David Hill David Hill is offline
external usenet poster
 
First recorded activity by GardenBanter: May 2012
Posts: 2,947
Default Polycarbonate greenhouse advice

On 22/06/2013 21:06, Howzit_China wrote:
Hi,

Looking for advice on a greenhouse I am looking to build in the sunniest
(relative) spot in my London garden.

My garden is West facing, the patch is South facing and gets sun from
12:30 to 18:00 (5.5 hours). Last summer I grew cherry tomatoes and
courgettes with fair success in this patch (birds got most of the cherry
toms tbh). I got a bunch or large tomatoes which didn't ripen in time
before the plants died at the end of the season (I didn't realise you
could ripen them indoors).

I want to build a greenhouse on this spot to increase my success rate
with tomatoes and other sun-lovers like peppers, cucumbers, squash and
pumpkin.

Originally I was going to buy a 4 x 6 foot aluminium greenhouse as the
space is awkwardly shaped and this is all I could find that would fit,
but then I thought if I design and build my own I could make better use
of the space and have a bigger greenhouse for the same money.

It's going to consist of a brick foundation (neighbours old driveway),
wooden frame (scrap liberated from skips), kitchen flooring for floor
(have this lying around) and a polycarbonate surface which I will need
to source. The whole structure will be covered in polycarbonate as I
don't want any wood exposed to the elements. See CAD drawing attached
(dimensions in mm). I've got my brother visiting in Sept and he has some
carpentry skills so planning to start work when he's over.

What I couldn't figure out how to get across in the drawing with my
limited CAD skills is the panels A and B, I want the poly carbonate
sheet at B to be fixed in place, and A to open upwards on hinges, like a
grow box, except a 1.6 meter high grow box = ). This should give me good
access to all the plants as the space behind B will be quite large for
me to be able to duck under.

So questions:

1. What thickness polycarbonate and how many chambers is usual for
greenhouses?
2. Does the pitch of the roof look OK? Is this important?
3. Will leaving the door open (A) occasionally be enough for ventilation
purposes?
4. Does the design look practical?
5. Is it worth the effort considering limited access to sunlight?

BTW I will growing plants in self watering containers as used by this
guy: 'How Self-Watering Containers Work |' (http://tinyurl.com/km9fpqb)

Any thoughts/comments appreciated.


+-------------------------------------------------------------------+
|Filename: GreenHouseDesign2.jpg |
|Download: http://www.gardenbanter.co.uk/attachment.php?attachmentid=15649|
+-------------------------------------------------------------------+


Firstly I'd make the front a lot taller, Min of 1.25m I'd make the back
2m, and slope the roof in one piece not 2 sections,
I can't see where you intend to have a door,
What are the ground measurements, I have no idea what 3477 0677 is.
What is the back wall? part of the house or what.
David @ a damp and windy part of Swansea Bay