hulling home grown coffee beans
 

A wonderful harvest of coffee beans in Sydney this year.

Dehulling on mass is a problem. A Queensland Government report on
coffee processing in the home is wonderfully informative and practical

http://www.dpi.qld.gov.au/horticulture/5471.html

One problem though. The report mentions hulling the beans by procesing
them at low speed in a "food processor or similar type of blender.
Plastic blades should be used . . ."

I have tried one or two electrical goods shops and cannot find such a
gadget with plastic blades (presumably provided as an accessory to the
normal stainless blades).

Can anybody point me to a brand?

hulling home grown coffee beans
 

my Kenwood processor has a plastic and a multitude of steel blades for
everything
have had it for several years
hope this helps


"Richard Wright" wrote in message
...
A wonderful harvest of coffee beans in Sydney this year.

Dehulling on mass is a problem. A Queensland Government report on
coffee processing in the home is wonderfully informative and practical

http://www.dpi.qld.gov.au/horticulture/5471.html

One problem though. The report mentions hulling the beans by procesing
them at low speed in a "food processor or similar type of blender.
Plastic blades should be used . . ."

I have tried one or two electrical goods shops and cannot find such a
gadget with plastic blades (presumably provided as an accessory to the
normal stainless blades).

Can anybody point me to a brand?

hulling home grown coffee beans
 

Why slow speeds and with plastic blades?

Just Curious,

L

hulling home grown coffee beans
 

You want to crack the outside hull, without doing too much damage to
the bean inside. The cracked hull falls off and you winnow it away by
blowing at the residue with a hair dryer. Dehulling is the most tricky
part of preparing coffee beans at home.

BTW, between the hull and the bean is a
silvery, parchment like, skin which you ignore. It blows off in the
roasting.

On Sun, 20 Oct 2002 07:41:46 GMT, "S. McLaren"
wrote:

Why slow speeds and with plastic blades?

Just Curious,

L

hulling home grown coffee beans
 

OK, I leanrt something new today. I usually get the Maranatha Praise coffee
beans which come preroasted.

hulling home grown coffee beans
 

That's what I usually do! But there are kilos of coffee beans on my
bushes this year.

BTW somebody emailed me asking why you don't have to dehull the green
coffee beans that they have seen being roasted in a fancy coffee
store. The answer is that the green beans have been already dehulled
before they are sold. There are two stages leading up to the
production of green beans - getting off the red skin and pulp, and
dehulling (which was my problem).

Since my original posting I have found that an old fashioned
hand-cranked mincer is more than satisfactory. All you do is take off
the blade and cutter at the outlet. The beans go down the spiral feed.
You hold a board against the outlet and the backup of beans in the
spiral cracks the hulls, without damaging the green beans. Then you
use a hair drier to blow the hulls off the beans.


On Tue, 22 Oct 2002 02:32:49 GMT, "S. McLaren"
wrote:

OK, I leanrt something new today. I usually get the Maranatha Praise coffee
beans which come preroasted.