Home |
Search |
Today's Posts |
|
#1
|
|||
|
|||
[IBC] Phoenix Graft Help Needed
Folks:
Finally spring is here in Oklahoma not only on the calendar, but in the actual weather conditions. Today is sunny and 72 degrees. This is an ideal time for phoenix grafts or tanuki. Well, a lot of the old-timers told me they use any available nail or screw to fasten the live material, usually a variety of juniper, to the dried dead wood. I have seen them use steel and coated iron nails. In the past I have only used wire and plastic cable ties myself. I would like to use nails or brads on my next projects. Colin Lewis in his book states that only copper nails or screws should be used with junipers. I also recall someone else saying the same thing; perhaps Brussell Martin. I am interested in the experiences of you folks as I have difficulty buying copper nails or brads around here. What have you used and how it worked out? Thank you in advance for sharing your experiences. Cheers. Peter Aradi Tulsa, Oklahoma ************************************************** ****************************** ++++Sponsored, in part, by Ken Rutledge++++ ************************************************** ****************************** -- The IBC HOME PAGE & FAQ: http://www.internetbonsaiclub.org/ -- +++++ Questions? Help? e-mail +++++ |
#3
|
|||
|
|||
[IBC] Phoenix Graft Help Needed
http://www.jamestowndistributors.com...WEBDISP.WOEB.M
AIN&ID_1=1&ID_2=568&ID_3=583&CLEV=4 -----Original Message----- From: Internet Bonsai Club ] On Behalf Of Peter Sent: Wednesday, March 17, 2004 1:00 PM To: Subject: [IBC] Phoenix Graft Help Needed Folks: Finally spring is here in Oklahoma not only on the calendar, but in the actual weather conditions. Today is sunny and 72 degrees. This is an ideal time for phoenix grafts or tanuki. Well, a lot of the old-timers told me they use any available nail or screw to fasten the live material, usually a variety of juniper, to the dried dead wood. I have seen them use steel and coated iron nails. In the past I have only used wire and plastic cable ties myself. I would like to use nails or brads on my next projects. Colin Lewis in his book states that only copper nails or screws should be used with junipers. I also recall someone else saying the same thing; perhaps Brussell Martin. I am interested in the experiences of you folks as I have difficulty buying copper nails or brads around here. What have you used and how it worked out? Thank you in advance for sharing your experiences. Cheers. Peter Aradi Tulsa, Oklahoma ************************************************** ************************** **** ++++Sponsored, in part, by Ken Rutledge++++ ************************************************** ************************** **** -- The IBC HOME PAGE & FAQ: http://www.internetbonsaiclub.org/ -- +++++ Questions? Help? e-mail +++++ ************************************************** ****************************** ++++Sponsored, in part, by Ken Rutledge++++ ************************************************** ****************************** -- The IBC HOME PAGE & FAQ: http://www.internetbonsaiclub.org/ -- +++++ Questions? Help? e-mail +++++ |
#4
|
|||
|
|||
[IBC] Phoenix Graft Help Needed
http://www.jamestowndistributors.com...WEBDISP.WOEB.M
AIN&ID_1=1&ID_2=554&ID_3=559&CLEV=4 -----Original Message----- From: Internet Bonsai Club ] On Behalf Of Peter Sent: Wednesday, March 17, 2004 1:00 PM To: Subject: [IBC] Phoenix Graft Help Needed Folks: Finally spring is here in Oklahoma not only on the calendar, but in the actual weather conditions. Today is sunny and 72 degrees. This is an ideal time for phoenix grafts or tanuki. Well, a lot of the old-timers told me they use any available nail or screw to fasten the live material, usually a variety of juniper, to the dried dead wood. I have seen them use steel and coated iron nails. In the past I have only used wire and plastic cable ties myself. I would like to use nails or brads on my next projects. Colin Lewis in his book states that only copper nails or screws should be used with junipers. I also recall someone else saying the same thing; perhaps Brussell Martin. I am interested in the experiences of you folks as I have difficulty buying copper nails or brads around here. What have you used and how it worked out? Thank you in advance for sharing your experiences. Cheers. Peter Aradi Tulsa, Oklahoma ************************************************** ************************** **** ++++Sponsored, in part, by Ken Rutledge++++ ************************************************** ************************** **** -- The IBC HOME PAGE & FAQ: http://www.internetbonsaiclub.org/ -- +++++ Questions? Help? e-mail +++++ ************************************************** ****************************** ++++Sponsored, in part, by Ken Rutledge++++ ************************************************** ****************************** -- The IBC HOME PAGE & FAQ: http://www.internetbonsaiclub.org/ -- +++++ Questions? Help? e-mail +++++ |
#5
|
|||
|
|||
[IBC] Phoenix Graft Help Needed
http://www.jamestowndistributors.com...WEBDISP.WOEB.M
AIN&ID_1=1&ID_2=554&ID_3=559&CLEV=4 -----Original Message----- From: Internet Bonsai Club ] On Behalf Of Peter Sent: Wednesday, March 17, 2004 1:00 PM To: Subject: [IBC] Phoenix Graft Help Needed Folks: Finally spring is here in Oklahoma not only on the calendar, but in the actual weather conditions. Today is sunny and 72 degrees. This is an ideal time for phoenix grafts or tanuki. Well, a lot of the old-timers told me they use any available nail or screw to fasten the live material, usually a variety of juniper, to the dried dead wood. I have seen them use steel and coated iron nails. In the past I have only used wire and plastic cable ties myself. I would like to use nails or brads on my next projects. Colin Lewis in his book states that only copper nails or screws should be used with junipers. I also recall someone else saying the same thing; perhaps Brussell Martin. I am interested in the experiences of you folks as I have difficulty buying copper nails or brads around here. What have you used and how it worked out? Thank you in advance for sharing your experiences. Cheers. Peter Aradi Tulsa, Oklahoma ************************************************** ************************** **** ++++Sponsored, in part, by Ken Rutledge++++ ************************************************** ************************** **** -- The IBC HOME PAGE & FAQ: http://www.internetbonsaiclub.org/ -- +++++ Questions? Help? e-mail +++++ ************************************************** ****************************** ++++Sponsored, in part, by Ken Rutledge++++ ************************************************** ****************************** -- The IBC HOME PAGE & FAQ: http://www.internetbonsaiclub.org/ -- +++++ Questions? Help? e-mail +++++ |
#6
|
|||
|
|||
[IBC] Phoenix Graft Help Needed
http://www.jamestowndistributors.com...WEBDISP.WOEB.M
AIN&ID_1=1&ID_2=554&ID_3=559&CLEV=4 -----Original Message----- From: Internet Bonsai Club ] On Behalf Of Peter Sent: Wednesday, March 17, 2004 1:00 PM To: Subject: [IBC] Phoenix Graft Help Needed Folks: Finally spring is here in Oklahoma not only on the calendar, but in the actual weather conditions. Today is sunny and 72 degrees. This is an ideal time for phoenix grafts or tanuki. Well, a lot of the old-timers told me they use any available nail or screw to fasten the live material, usually a variety of juniper, to the dried dead wood. I have seen them use steel and coated iron nails. In the past I have only used wire and plastic cable ties myself. I would like to use nails or brads on my next projects. Colin Lewis in his book states that only copper nails or screws should be used with junipers. I also recall someone else saying the same thing; perhaps Brussell Martin. I am interested in the experiences of you folks as I have difficulty buying copper nails or brads around here. What have you used and how it worked out? Thank you in advance for sharing your experiences. Cheers. Peter Aradi Tulsa, Oklahoma ************************************************** ************************** **** ++++Sponsored, in part, by Ken Rutledge++++ ************************************************** ************************** **** -- The IBC HOME PAGE & FAQ: http://www.internetbonsaiclub.org/ -- +++++ Questions? Help? e-mail +++++ ************************************************** ****************************** ++++Sponsored, in part, by Ken Rutledge++++ ************************************************** ****************************** -- The IBC HOME PAGE & FAQ: http://www.internetbonsaiclub.org/ -- +++++ Questions? Help? e-mail +++++ |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
[IBC] Phoenix Graft Help Needed | Bonsai | |||
[IBC] Phoenix Graft Help Needed | Bonsai | |||
[IBC] Phoenix Graft Help Needed | Bonsai | |||
[IBC] Phoenix Graft Help Needed | Bonsai | |||
[IBC] Phoenix Graft Help Needed | Bonsai |