Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Hyponex Soil parameters
Well, according to Diana Walstad, a soil substrate will help to establish
anaerobic zones, which the plants like They do? Why do the plants transport O2 to their Rhizosphere then? They actively transport O2 to their roots and around each root. This has got help many aerobic bateria in those areas/regions. and which helps to keep iron accessible. But aren't you also adding that to the water column as well? Anaerobic zones can also produce H2S if there is too much organic matter in there. I've always been puzzled by the fluorite-only approach. Obviously, many people have good results with that. But I keep thinking that fluorite-only (especially when combined with substrate heating) would make it difficult for anaerobic zones to get established Why do you assume anaerobic substrates are better or worse than aerobic or sightly aerobic substrate types for plant roots in aquatic systems? Flourite w/o cables has pretty close to optimum flow rates. Cable add too much. RFUG worked great for me for a decade. That's pretty high flow. The optimum figure for flow rate to best roots growth was about .49 liters per day of flow per meter squared. Not much. Flourite is sandy iron rich clay. Clay has immense internal suface area and extremely tiny pores and many binding sites. If the clay is hardened, then kept at certain grain size, the outer parts of each grain will be fairly aerobic but those tiny internal pores will become anaerobic so there is a tiny micro habitat gradient on each grain. You'll see roots often boring into the grains. Roots are very active. But if the nutrients are also supplied in the water column, they will not take up the nutreints through the roots very much, they will take it in from leaves and stems mainly if there's enough in the water column. This has been shown to be the case specifically with a wide variety oif aquatic plants. Unless you look at those levels in the water column, it's difficult to say what amount of interaction the substrate is truly having or not. One way to test for this is to have a tank with half with and half with something else for the substrate. Use the same plant etc. A similar thing can be done for lighting temp colors, different intensities etc. (which, according to Walstad, are one essential ingredient for healthy plants). The owner of my LFS tells me that eleocharis acicularis will not grow for him in a fluorite tank. He has two identical tanks that share a single filter, one with a peat substrate and gravel, the other with fluorite only; the hair grass won't grow well in the fluorite-only tank and eventually dies off, whereas it's doing well in the tank with peat in the substrate. Does great in my tanks. As a matter of fact, I have less trouble with plant species in onyx/flourite tanks than any substrate I've tried, I've tried all sorts of mixes. Given that, in nature, plants grow in mud, All plants do not grow in mud. Many grow in sand, rocky river beds etc. I know, I visit these plants/places in nature. The nicest looking beds have rocks or sand. But there are also nice examples of mud based substrates also. I'm waiting for my digital underwater camera to try out next week. it seems that soil or peat would come closer to natural conditions than pure gravel or fluorite substrates, and the good results they give would stand to reason. (But there is the mess you get every time you uproot a plant -- not pretty.) I hate the mess too. But Clay is natural and which is what the flourite/onyx sand is, they don't "make it". It's just natural clay ground up. But I like peat, so I add a handful per sq ft to the bottom layer for good measure to the onyx or flourite. I've liked peat sub's better than soil. I did like kitty litter(again, clay) and gravel, that was a winning combo, but messy when you replant. Relatively fast growing plants wear out soil in terrestrial pots in about a year or less. Flourite never wears out, but you can add macro nutrients to the water column also, just no urea or NH4. The same thing can be done for soil sub's also. I really like peat as an alternative to soil. I think the risks of contamination with bacteria or parasites are lower, and you can be sure that it won't contain added phosphates or urea. If you water the peat for a week before putting it into the tank, you get rid of most of the yellow color; once the peat is under the gravel, it will leach little (if any) color into the tank. (I have a minute shading of yellow in my tank, but you have to look closely along the long axis through the water to pick it up.) I agree, I get no discoloration personally, but I'm not adding as much. I got use to it years ago, so now I use yellow colored lighting to mimic the effect:-) If you want to keep blackwater fish, which like soft, acidic water, the peat has the added bonus of helping to keep the pH low. And the humic acids that leach out of the peat are considered useful too: they inihibit bacterial blooms and diseases because they act as a mild antiseptic. I am really pro peat as well. That low pH/humic acids will help produce a reductive substrate which is important in release of those cations like Fe, not just anaerobic conditions. Once the plant roots become well established along with some organic matter, the gravel does very well. So a little both, A little element of peat and a little of the flourite/onyx sand does better than each does alone. Water column dosing and substrate dosing of nutrients works best IME. Not just one method. A side comment on the flourite tanks with the non CO2 low tech approach, it works better IMO than soil and gets better as the tank ages. And I grew hairgrass and Gloss. But the Gloss did grow pretty slow, it was great! The hairgrass went to town. No water changes, just feed the fish. Once a month prunings. Glad there are still peat folks left. I do add more peat when I know it's going to be a non CO2 tank. I use ground peat about 1 inch dry and 3-4 inches of flourite with lots of mulm mixed in. Not much different than the CO2 enriched set up except for more peat. Try it and see what you think. Regards, Tom Barr Cheers, Michi. |
#2
|
|||
|
|||
Hyponex Soil parameters
And I grew hairgrass and Gloss. But the Gloss did grow pretty slow, it
was great! The hairgrass went to town. Interesting. How much light did you have? I am trying to grow a small lawn of hairgrass and glosso in my high-tech tank (100% Onyx Sand). The glosso is growing like a weed, but the hairgrass is growing very slowly. Maybe I should trying moving the hairgrass to my low-tech, Flourite-substrate tank. Leigh http://www.fortunecity.com/lavender/halloween/881/ |
#3
|
|||
|
|||
Hyponex Soil parameters
Interesting. How much light did you have?
About 2w/gallon reg FL's. I am trying to grow a small lawn of hairgrass and glosso in my high-tech tank (100% Onyx Sand). The glosso is growing like a weed, but the hairgrass is growing very slowly. Once it gets going it'll do fine. Maybe I should trying moving the hairgrass to my low-tech, Flourite-substrate tank. They should do fine in both, patience, patience. Regards, Tom Barr Leigh http://www.fortunecity.com/lavender/halloween/881/ |
#4
|
|||
|
|||
Hyponex Soil parameters
The glosso is growing like a weed, but the hairgrass is
growing very slowly. Once it gets going it'll do fine. I hope so. It grew fairly fast when I first put it in, but it seems have slowed down lately. The new growth stays very short. They should do fine in both, patience, patience. Some of the hairgrass came up this morning, when I ripped out a handful of glosso to give to someone. I planted the displaced hairgrass in the other tank. We'll see how it does. Leigh http://www.fortunecity.com/lavender/halloween/881/ |
#5
|
|||
|
|||
Hyponex Soil parameters
" wrote in message
om... Well, according to Diana Walstad, a soil substrate will help to establish anaerobic zones, which the plants like They do? Why do the plants transport O2 to their Rhizosphere then? They actively transport O2 to their roots and around each root. This has got help many aerobic bateria in those areas/regions. and which helps to keep iron accessible. Hi Tom, yes, plant roots do oxygenate the substrate, no doubt. Why do they do it? According to Walstad, several reasons: - Oxygenation prevents an excess of soluble iron entering the plant. (Too much iron is just as bad as too little: too much iron causes heavy metal poisoning.) - Roots need oxygen just as the rest of the plant does. Oxygenation of the roots during the day helps the roots respirate during the night. - Bacteria use oxygen to oxygenate H2S, which is toxic. The root oxygenation protects the plant against a substrate that's gone too anaerobic. - Root oxygen release can oxydize soluble iron into ironhydroxide hydronium ions. In turn, this helps the plant to increase it's intake of zinc and phosphate. (Plants absorb phosphate preferentially through the roots (depending on the plant, 60% to 99% of phosphate enters the plant through the roots, even if the water contains an ample supply of phosphate).) - Root oxygen provides an aerobic enviornment for symbiotic fungi that help the plant's nutrient uptake. - Oxygen acts as an anti-anaerobic bacterial agent and protects the roots against rot. But aren't you also adding that to the water column as well? Anaerobic zones can also produce H2S if there is too much organic matter in there. Yes -- if the redox potential drops too low (-215 mV), you get H2S. Go lower (-244 mV), and you end up with methane (produced by the reaction: Co2 + 8H+ + 8e- - CH4 + 2H2O). According to Walstad, anaerobic zones in the substrate (not *too* anaerobic) are still desirable: They aid in denitification (turning NO3- into NO2-) and help to keep manganese in sulution as (Mn2+, at +396 mV) and help to keep iron in solution (Fe2+, at -182 mV). The denitrifying aspect of anaerobic pockets seems to be the most useful aspect of a soil substrate (because I can easily add Fe, K, Mn, and so on with fertilizer). I've always been puzzled by the fluorite-only approach. Obviously, many people have good results with that. But I keep thinking that fluorite-only (especially when combined with substrate heating) would make it difficult for anaerobic zones to get established Why do you assume anaerobic substrates are better or worse than aerobic or sightly aerobic substrate types for plant roots in aquatic systems? See above -- Krause also recommends soil and peat substrates, also quoting anaerobic processes as being desirable. Flourite w/o cables has pretty close to optimum flow rates. Cable add too much. RFUG worked great for me for a decade. That's pretty high flow. The optimum figure for flow rate to best roots growth was about .49 liters per day of flow per meter squared. Not much. Right. Very slow flow, so you are not constantly flooding the roots with oxygen, but you keep the substrate sufficiently aerated to prevent the bad anaerobic stuff (H2S) from happening. Walstad quotes evidence of reduced plant growth with substrates that are too oxygenated. The high-throughput under-gravel filters of the past were great plant killers. (I never used one myself, but I've had plenty of conversations with other aquarists who keep telling stories of weekly trips to the LFS to replenish dying plants...) Flourite is sandy iron rich clay. Clay has immense internal suface area and extremely tiny pores and many binding sites. If the clay is hardened, then kept at certain grain size, the outer parts of each grain will be fairly aerobic but those tiny internal pores will become anaerobic so there is a tiny micro habitat gradient on each grain. You'll see roots often boring into the grains. Roots are very active. Right. I'm sure that's why flourite is considered a good source of iron because those anaerobic pockets would help to keep the Fe in solution so the plants can get at it. But if the nutrients are also supplied in the water column, they will not take up the nutreints through the roots very much, they will take it in from leaves and stems mainly if there's enough in the water column. Well, it depends on the nutrient: phosphate is taken up preferentially through the roots, ammonia is taken up preferentially through the leaves. This has been shown to be the case specifically with a wide variety oif aquatic plants. Unless you look at those levels in the water column, it's difficult to say what amount of interaction the substrate is truly having or not. One way to test for this is to have a tank with half with and half with something else for the substrate. Use the same plant etc. A similar thing can be done for lighting temp colors, different intensities etc. I'd probably make it two tanks in a controlled experiment because, with a single tank, whatever leaches out of the soil substrate might affect the non-soil part of the tank and ruin the control. It really would be interesting to try this. But I don't have the room or inclination at the moment to set up two tanks just to find out why the one I have already is working so well :-) (which, according to Walstad, are one essential ingredient for healthy plants). The owner of my LFS tells me that eleocharis acicularis will not grow for him in a fluorite tank. He has two identical tanks that share a single filter, one with a peat substrate and gravel, the other with fluorite only; the hair grass won't grow well in the fluorite-only tank and eventually dies off, whereas it's doing well in the tank with peat in the substrate. Does great in my tanks. As a matter of fact, I have less trouble with plant species in onyx/flourite tanks than any substrate I've tried, I've tried all sorts of mixes. Interesting. I guess this shows that you can't point at a single factor and say "x works and y doesn't". I know that lots of people are having great success with flourite (and I know of people who tore their tank down to get rid of the soil they had so labouriously put there a few months earlier...) Most likely, those flourite tanks that work contain (or lack) one or more other things that, in balance, end up making the whole thing work. The combination of lots of variables in the right proportion is probably more important than the level of any single one of them. Given that, in nature, plants grow in mud, All plants do not grow in mud. Many grow in sand, rocky river beds etc. Right. Sorry, I should have been more precise. I know, I visit these plants/places in nature. The nicest looking beds have rocks or sand. But there are also nice examples of mud based substrates also. Most of the crypt pictures I've seen show crypts growing in mud. Yes, there is often a sand or gravel layer near the top but, as soon as you go down an inch or so, the substrate is full of accumulated organic material. (All that leaf litter has to end up somewhere...) Krause has some interesting illustrations of soil cores taken in various habitats. From memory, pretty much all of them turn into mud a few inches below the surface at the latest (and plant roots seem to extend into the mud most of the time). I'm waiting for my digital underwater camera to try out next week. I'm envious! :-) it seems that soil or peat would come closer to natural conditions than pure gravel or fluorite substrates, and the good results they give would stand to reason. (But there is the mess you get every time you uproot a plant -- not pretty.) I hate the mess too. But Clay is natural and which is what the flourite/onyx sand is, they don't "make it". It's just natural clay ground up. Yes. But I'm still unsure about how I would get anaerobic zones in fluorite. It seems that it is far too coarse for those to build up. Maybe the micropores you mentioned are the real secret: you'd end up with anaerobic areas inside the flourite without having the mess you get with soil or peat. I honestly don't know... I agree, I get no discoloration personally, but I'm not adding as much. I got use to it years ago, so now I use yellow colored lighting to mimic the effect:-) Spoken like a true traditionalist :-) If you want to keep blackwater fish, which like soft, acidic water, the peat has the added bonus of helping to keep the pH low. And the humic acids that leach out of the peat are considered useful too: they inihibit bacterial blooms and diseases because they act as a mild antiseptic. I am really pro peat as well. That low pH/humic acids will help produce a reductive substrate which is important in release of those cations like Fe, not just anaerobic conditions. Once the plant roots become well established along with some organic matter, the gravel does very well. So a little both, A little element of peat and a little of the flourite/onyx sand does better than each does alone. Water column dosing and substrate dosing of nutrients works best IME. Not just one method. I agree. Dupla seem to agree too: substrate long-term fertilizer (DuplaRoot), plus water fertilizer (DuplaPlant tablets and DuplaPlant 24 drops). Neglect either, and the plants won't do so well. Glad there are still peat folks left. I do add more peat when I know it's going to be a non CO2 tank. I use ground peat about 1 inch dry and 3-4 inches of flourite with lots of mulm mixed in. Not much different than the CO2 enriched set up except for more peat. Try it and see what you think. I might do that for my next tank. Despite having harped on about how great peat is, I still don't like the mess it makes when I pull up a plant. More fluorite and less peat would obviously make less of a mess. Cheers, Michi. -- Michi Henning Ph: +61 4 1118-2700 Triodia Technologies http://www.triodia.com/staff/michi |
#6
|
|||
|
|||
Hyponex Soil parameters
- Oxygenation prevents an excess of soluble iron entering the plant.
(Too much iron is just as bad as too little: too much iron causes heavy metal poisoning.) So they use O2 as a gate keeper to prevent excess nutrients from coming into the roots? That sounds awful speculative at best. I have done work on Spartinia and some other marsh plants that deal with anaerobic substrates, salt level gradients. I don't buy this agrument. - Roots need oxygen just as the rest of the plant does. Oxygenation of the roots during the day helps the roots respirate during the night. Roots need O2 all the time. - Bacteria use oxygen to oxygenate H2S, which is toxic. The root oxygenation protects the plant against a substrate that's gone too anaerobic. (Plants absorb phosphate preferentially through the roots (depending on the plant, 60% to 99% of phosphate enters the plant through the roots, even if the water contains an ample supply of phosphate).) No they don't, they will perferencially absorb PO4 right through their leaves and stems. Reference: The journal Freshwater Ecology Feb 2000, distilled: Aquatic plants(a large cross section of common aquatic plants, not just one or two) will take in nutrients from the water column if enough is avaiable. When there is not enough PO4 or NO3 in the water column, they will allocate more uptake from the roots if there is a source of nutrients there but not in the water column. Basically why transport nutrients, if you can get them right where you need them? You can also see this in your tank by trying to add a PO4 source to your gravel versus adding KH2PO4 to your water column. You'll see immediate(within an hour or less) plant responses from this. I think this notion you are making here is valid IF you have an environment where there is little PO4, NO3 etc in the water column, but if you test the water column with adequate supply of dissolved nutrients, the roots don't need to take in the nutrients and transport them. Plants will take the nutrients where they can get it. But if you don't test the other side of that coin, one can draw the incorrect conclusion(s). - Root oxygen provides an aerobic enviornment for symbiotic fungi that help the plant's nutrient uptake. There has been some interesting work done very recently on fungi in aquatic plants. I've found ecto mycorrhizae on Bolbitus rhizomes/roots. They aid in denitification (turning NO3- into NO2-) and help to keep manganese in sulution as (Mn2+, at +396 mV) and help to keep iron in solution (Fe2+, at -182 mV). The denitrifying aspect of anaerobic pockets seems to be the most useful aspect of a soil substrate (because I can easily add Fe, K, Mn, and so on with fertilizer). NO3=NO2? Plants don't use NO2. They convert NO3 at their cell's chloroplast membrane to NO2 and then very quickly(this way it cannot cause damage) into NH4 but NO2 is toxic to plants anywhere else in a plant. You can also try this out at home in a heavily planted tank. Try fishless cycling in a fully packed plant tank. The NH4 will decline, the NO2 will appear and the persist for 2-3 weeks, even with a fully planted tank and no outside sources of N being added. If plants used it, why aren't they? Simple, they don't use it. See above -- Krause also recommends soil and peat substrates, also quoting anaerobic processes as being desirable. I've found examples where this is not true in nature and in my tank. Plants are very adaptable and dependent not simply on the substrate and their roots systems but the water column as well, which is much easier to test for and measure concerning uptake rates and plant's needs. Right. Very slow flow, so you are not constantly flooding the roots with oxygen, but you keep the substrate sufficiently aerated to prevent the bad anaerobic stuff (H2S) from happening. Walstad quotes evidence of reduced plant growth with substrates that are too oxygenated. But......there's this issues once again, if the plants are supplied with enough water column nutrients, then the substrate doesn't matter much if at all except for a mechanical support for attachemnt. You cannot ignore this issue when addressing aquatic plants. It fouls your conclusions and data a great deal. The high-throughput under-gravel filters of the past were great plant killers. (I never used one myself, but I've had plenty of conversations with other aquarists who keep telling stories of weekly trips to the LFS to replenish dying plants...) I think traditional one did so so. I use a RFUG grid of tubes like on pg 15 of the Rataj/Horemannii Book. This worked as well as any plant tank I'd seem until I saw some Amano's work. I also wanted a simpler to make substrate and felt there could be a nice balance between water column and substrate uptake. Why not have good levels in both places? Right. I'm sure that's why flourite is considered a good source of iron because those anaerobic pockets would help to keep the Fe in solution so the plants can get at it. Yes, I tend to feel this way, although I'm not certain, just speculating (as usual. Well, it depends on the nutrient: phosphate is taken up preferentially through the roots, ammonia is taken up preferentially through the leaves. See above, I have not found the first part to be the case at all. But the second part is true. I'd probably make it two tanks in a controlled experiment because, with a single tank, whatever leaches out of the soil substrate might affect the non-soil part of the tank and ruin the control. It really would be interesting to try this. But I don't have the room or inclination at the moment to set up two tanks just to find out why the one I have already is working so well :-) I have 8 tanks just for such a test. But it'll be a year or two before I get to anything like that. The combination of lots of variables in the right proportion is probably more important than the level of any single one of them. Yep, you got it. But the relative effects of each vaiable is what is needed to be considered. I'm saying you'll get better growth, if you use both a good water column dosing routine(including macro nutrients) with a decent substrate. The water column is more important than the substrate in CO2 enriched tanks with higher growth rates. In non CO2 tanks, this can be true as well but more focus is shifted to the lower maintenace and slower growth rates which will lend more need for a good substrate supply of nutrients. Also, dirt wears out after awhile. No nutrients left. But you can freeze soupy soil in ice cube trays and push these down under neath plants etc. Or clay balls mixed with dirt. I'm more partial to peat myself. Most of the crypt pictures I've seen show crypts growing in mud. Yes, there is often a sand or gravel layer near the top but, as soon as you go down an inch or so, the substrate is full of accumulated organic material. (All that leaf litter has to end up somewhere...) Krause has some interesting illustrations of soil cores taken in various habitats. From memory, pretty much all of them turn into mud a few inches below the surface at the latest (and plant roots seem to extend into the mud most of the time). I buy this. I'm waiting for my digital underwater camera to try out next week. I'm envious! :-) Try looking on ebay, I got mine for 36$ including shipping. It's only 640 x 480 but that's fine. Has a flash also. Yes. But I'm still unsure about how I would get anaerobic zones in fluorite. Recall each grain of flourite or kitty litter etc is a highly porous structure. The internal micro habitat is anaerobic or close to it. I tested plain old gravel with laterite vs flourite and considering the make up of each(we had them analyzed by a lab), the physical stucture was the only real difference I could come up with of why one did/does better. The flourite can also be moved around, disturbed etc. Due to the micro habitat being preserved in each grain, there's not need to worry about disturbing a larger "macro layer" although some does form in flourite onyx sand substrates. Just not nearly as a dependent issue I think. It seems that it is far too coarse for those to build up. Maybe the micropores you mentioned are the real secret: you'd end up with anaerobic areas inside the flourite without having the mess you get with soil or peat. I honestly don't know... That's my guess. I might do that for my next tank. Despite having harped on about how great peat is, I still don't like the mess it makes when I pull up a plant. More fluorite and less peat would obviously make less of a mess. Well there's only a small amount and it is added only the very bottom layer. Amano's substrates, the Powersands, have peat covered light weight clay rich high surface area grains. I use something like Scott's ground peat, no loose moss etc. Taste great on Chicken:-) Regards, Tom Barr Cheers, Michi. |
#7
|
|||
|
|||
Hyponex Soil parameters
" wrote in message
om... Tom, first of all, let me make it clear that I was quoting Walstad on these points, so I'm innocent! :-) - Oxygenation prevents an excess of soluble iron entering the plant. (Too much iron is just as bad as too little: too much iron causes heavy metal poisoning.) So they use O2 as a gate keeper to prevent excess nutrients from coming into the roots? That sounds awful speculative at best. I have done work on Spartinia and some other marsh plants that deal with anaerobic substrates, salt level gradients. I don't buy this agrument. Well, that's what Walstad says. Here is the precise quote: "[...] root oxygenation of the rhizosphere counteracts substrate toxins. For example, excessive soluble iron is potentially toxic to plant roots. But root oxygen release causes iron to precipitate as iron oxides on the outside of the root, thus preventing excessive iron from entering the roots." The reference she quotes for this passage is: Armstrong W. 1979. Aereation in higher plants. Adv. Bot. Res. 7: 225-332. - Roots need oxygen just as the rest of the plant does. Oxygenation of the roots during the day helps the roots respirate during the night. Roots need O2 all the time. Right. But, during the night, the plant can't make oxygen. So, I would think that the oxygen deposited in the substrate by the roots during the day would help them get through the night. - Bacteria use oxygen to oxygenate H2S, which is toxic. The root oxygenation protects the plant against a substrate that's gone too anaerobic. (Plants absorb phosphate preferentially through the roots (depending on the plant, 60% to 99% of phosphate enters the plant through the roots, even if the water contains an ample supply of phosphate).) No they don't, they will perferencially absorb PO4 right through their leaves and stems. Reference: The journal Freshwater Ecology Feb 2000, distilled: Aquatic plants(a large cross section of common aquatic plants, not just one or two) will take in nutrients from the water column if enough is avaiable. That's interesting. The reference you quote is in direct conflict with Walstad. Again, here is the quote: "Many aquatic plants prefer root uptake of phosphorus. For example, investigators showed that 3 aquatic plant species, given a choice, took up more P from the substrate than from the water." She goes on to describe the experiment; the plants were grown in a two- chambered tank, with the roots sealed of from the stem and leaves. Radio-labeled P was used to see where the P in the plant was coming from. The plants took P preferentially from the roots. Walstad quotes over 90% P from the roots for Myriophyllum brasiliense, 59% for M. spicatum, 74% for Elodea densa, and 99% for Najas flexilis. The references for this section a Pedersen O and Sand-Jense K. 1997. Transpiration does not control growth and nutrient supply in the amphibious plant Mentha aquatica. Pant Cell Environ. 20: 117-123. Carignan R and Kalff J. 1980. Phosphorus sources for aquatic weeds: Water or sediments? Science 207: 987-988. Moeller RE, Burkholder JM, and Wetzel RG. 1988. Significance of sedimentary phosphorus to a rooted submersed macrohpyte (Jaja flexilis (Willd.) Rostk. and Schmidt) and its algal epiphytes. Aquat. Bot. 32: 261-281. So, I don't know who's right. Maybe it strongly depends on the species of plant, in which case generalizations such as "P comes from the roots" or "P comes from the leaves" would be useless. When there is not enough PO4 or NO3 in the water column, they will allocate more uptake from the roots if there is a source of nutrients there but not in the water column. Basically why transport nutrients, if you can get them right where you need them? I have no idea. But, according to Walstad, the P was made available to both leaves and roots to see which the plant would prefer. You can also see this in your tank by trying to add a PO4 source to your gravel versus adding KH2PO4 to your water column. You'll see immediate(within an hour or less) plant responses from this. I didn't know this. What response? Higher respiratory rate? (I would think that any other response would take more than an hour to detect?) I think this notion you are making here is valid IF you have an environment where there is little PO4, NO3 etc in the water column, but if you test the water column with adequate supply of dissolved nutrients, the roots don't need to take in the nutrients and transport them. Plants will take the nutrients where they can get it. But if you don't test the other side of that coin, one can draw the incorrect conclusion(s). Well, I honestly don't know. I was quoting Walstad, who seems to enjoy an expert reputation. But I believe she is also considered something of a renegade in the aquatic community, considering that she advocates putting soil into your tank :-) They aid in denitification (turning NO3- into NO2-) and help to keep manganese in sulution as (Mn2+, at +396 mV) and help to keep iron in solution (Fe2+, at -182 mV). The denitrifying aspect of anaerobic pockets seems to be the most useful aspect of a soil substrate (because I can easily add Fe, K, Mn, and so on with fertilizer). NO3=NO2? Plants don't use NO2. They convert NO3 at their cell's chloroplast membrane to NO2 and then very quickly(this way it cannot cause damage) into NH4 but NO2 is toxic to plants anywhere else in a plant. No, Walstad isn't implying that the NO2 is useful to the plant. What she is saying is that anaerobic processes are useful because conversion of NO3 to NO2 is the first stage of denitrification, and denitrification is useful (albeit for the tank, not the plants, who need some NO3). You can also try this out at home in a heavily planted tank. Try fishless cycling in a fully packed plant tank. No, I will never try that again, not after the disaster I had last time :-) The NH4 will decline, the NO2 will appear and the persist for 2-3 weeks, even with a fully planted tank and no outside sources of N being added. If plants used it, why aren't they? Simple, they don't use it. Right. I didn't mean to imply that NO2 was used by plants. Sorry, I didn't make this clear. See above -- Krause also recommends soil and peat substrates, also quoting anaerobic processes as being desirable. I've found examples where this is not true in nature and in my tank. Plants are very adaptable and dependent not simply on the substrate and their roots systems but the water column as well, which is much easier to test for and measure concerning uptake rates and plant's needs. Yes. Again, I didn't mean to imply that what goes on in the water column is not important. It was just that we were talking about why roots oxygenate the substrate, and how that fits together with people like Walstad and Krause advocating anaerobic zones in the substrate, which would seem to be in conflict with what the plants are doing. Right. Very slow flow, so you are not constantly flooding the roots with oxygen, but you keep the substrate sufficiently aerated to prevent the bad anaerobic stuff (H2S) from happening. Walstad quotes evidence of reduced plant growth with substrates that are too oxygenated. But......there's this issues once again, if the plants are supplied with enough water column nutrients, then the substrate doesn't matter much if at all except for a mechanical support for attachemnt. You cannot ignore this issue when addressing aquatic plants. It fouls your conclusions and data a great deal. I think this is where you and Walstad differ. At least for P, Walstad says that the roots are more than just anchors. And, of course, she is arguing not just about plants, but for a balanced and healthy overall aquarium environment. For that, according to her, soil substrates are better than ones without soil. (*Don't* crucify me for this -- this is Walstad's reasoning, not mine (although I happen to believe her because I've had good success with soil/peat substrates).) The high-throughput under-gravel filters of the past were great plant killers. (I never used one myself, but I've had plenty of conversations with other aquarists who keep telling stories of weekly trips to the LFS to replenish dying plants...) I think traditional one did so so. I use a RFUG grid of tubes like on pg 15 of the Rataj/Horemannii Book. This worked as well as any plant tank I'd seem until I saw some Amano's work. I also wanted a simpler to make substrate and felt there could be a nice balance between water column and substrate uptake. Why not have good levels in both places? I honestly have no personal experience with high-throughput UGFs, so I can only pass on experiences related to me by other people. Personally, I don't know many people who told me that their plants were growing like crazy with an UGF, but I've spoken to lots who said that their plants were dying all the time. But it's interesting, isn't it: you report success with such a setup, meaning that it's definitely possible. Again, I think this goes to show that too much focus on a single variable isn't all that useful and that the combination of factors is what is more important. Right. I'm sure that's why flourite is considered a good source of iron because those anaerobic pockets would help to keep the Fe in solution so the plants can get at it. Yes, I tend to feel this way, although I'm not certain, just speculating (as usual. Well, that makes it two of us then :-) Well, it depends on the nutrient: phosphate is taken up preferentially through the roots, ammonia is taken up preferentially through the leaves. See above, I have not found the first part to be the case at all. But the second part is true. Like I said, I was quoting Walstad. Another interesting tidbit: potassium is preferentially taken up through the shoots, rather than the roots. Walstad reports 5 times the potassium uptake through the shoots than the roots for Elodea occidentalis. I'd probably make it two tanks in a controlled experiment because, with a single tank, whatever leaches out of the soil substrate might affect the non-soil part of the tank and ruin the control. It really would be interesting to try this. But I don't have the room or inclination at the moment to set up two tanks just to find out why the one I have already is working so well :-) I have 8 tanks just for such a test. But it'll be a year or two before I get to anything like that. Bloody hell: that's what I'd call a dedicated aquarist! The combination of lots of variables in the right proportion is probably more important than the level of any single one of them. Yep, you got it. But the relative effects of each vaiable is what is needed to be considered. I'm saying you'll get better growth, if you use both a good water column dosing routine(including macro nutrients) with a decent substrate. The water column is more important than the substrate in CO2 enriched tanks with higher growth rates. Yes, I buy that, definitely. Substrate isn't everything, and comparatively less important than what's in the water, no doubt. (Otherwise, no-one would grow anything in plain gravel but, in fact, some people are growing plants in plain gravel quite nicely, thank you very much ;-) In non CO2 tanks, this can be true as well but more focus is shifted to the lower maintenace and slower growth rates which will lend more need for a good substrate supply of nutrients. Yes. In particular, iron and CO2 seem to be important factors coming from the substrate in absence of Fe fertilization and CO2 injection. (Much of the organic matter in the substrate ends up as CO2 when it decomposes.) Also, dirt wears out after awhile. No nutrients left. But you can freeze soupy soil in ice cube trays and push these down under neath plants etc. Or clay balls mixed with dirt. I'm more partial to peat myself. I agree. Walstad also quotes issues around substrate depletion for non-fertilized and CO2-injected tanks: eventually, most of the organic matter has been used up and, suddenly, plant growth is stunted because one or more essential nutrients have gone missing. I tested plain old gravel with laterite vs flourite and considering the make up of each(we had them analyzed by a lab), the physical stucture was the only real difference I could come up with of why one did/does better. The flourite can also be moved around, disturbed etc. Due to the micro habitat being preserved in each grain, there's not need to worry about disturbing a larger "macro layer" although some does form in flourite onyx sand substrates. Just not nearly as a dependent issue I think. That makes sense to me. (And, sorry to press the point, it would seem to support Walstad: if fluorite indeed does support anaerobic processes in its pores, and plants do better with it, that would seem to indicate that the anaerobic processes are good for something :-) Amano's substrates, the Powersands, have peat covered light weight clay rich high surface area grains. I use something like Scott's ground peat, no loose moss etc. Taste great on Chicken:-) Cultural differences, I'm afraid: as an Australian, I don't know Scott's peat, so I'm not getting the joke. Is Scott's peat something that's popular for smoking/barbequeing chicken? If so, I got the joke -- if not, someone will have to help me out and reduce my ignorance level :-) Cheers, Michi. -- Michi Henning Ph: +61 4 1118-2700 Triodia Technologies http://www.triodia.com/staff/michi |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Water parameters/C02 | Freshwater Aquaria Plants | |||
Mystery Water Parameters | Freshwater Aquaria Plants | |||
Comments on some tank parameters please | Freshwater Aquaria Plants | |||
Balancing Parameters | Freshwater Aquaria Plants | |||
Balancing Parameters | Freshwater Aquaria Plants |