GardenBanter.co.uk

GardenBanter.co.uk (https://www.gardenbanter.co.uk/)
-   Freshwater Aquaria Plants (https://www.gardenbanter.co.uk/freshwater-aquaria-plants/)
-   -   Trace element % (https://www.gardenbanter.co.uk/freshwater-aquaria-plants/33250-trace-element-%25.html)

Skunky 20-06-2003 10:27 PM

Trace element %
 
Managed to hold of some trace elements at last, from 'chempak'

How does this look for % of elements

B= 0.1%
CU=0.25%
FE=3.3%
MgO=7.0%
Mn=3.0%
Mo=0.005%
Zinc=1.0%

Thanx

Dave Millman 21-06-2003 01:20 AM

Trace element %
 
Skunky wrote:

Managed to hold of some trace elements at last, from 'chempak'

How does this look for % of elements

B= 0.1%
CU=0.25%
FE=3.3%
MgO=7.0%
Mn=3.0%
Mo=0.005%
Zinc=1.0%


Here is the breakdown for PMDD, a good standard of comparison:
http://www.thekrib.com/Plants/Fertilizer/pmdd-tim.html

Here is what is in some other mixes:
http://www.aquabotanic.com/plantfer.htm


Paul Davies 22-06-2003 03:08 PM

Trace element %
 
Hi
I've worked out the concentrations needed for use with the Chempak.
Just follow this link
http://aquabotanicwetthumb.infopop.c...2&m=3366044813

You bshould just need to alter the addition rates according to the volume of your tank.

Paul


"Skunky" wrote in message ...

Managed to hold of some trace elements at last, from 'chempak'

How does this look for % of elements

B= 0.1%
CU=0.25%
FE=3.3%
MgO=7.0%
Mn=3.0%
Mo=0.005%
Zinc=1.0%

Thanx


--
Skunky

'Peace On Earth.....And In The Water'
------------------------------------------------------------------------
posted via www.GardenBanter.co.uk



----== Posted via Newsfeed.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeed.com The #1 Newsgroup Service in the World! 100,000 Newsgroups
---= 19 East/West-Coast Specialized Servers - Total Privacy via Encryption =---



Skunky 23-06-2003 10:56 AM

Thanx for the reply Paul. I read the threads. I have mixed 2 scoops of the trace element mix into 300ml of water, I've basically followed the sears and conlin recipe. Although I have some KNO3, I have omitted it as my NO3 levels in both tanks range between 10-25mg/l due to reasonable fish load. As for PO4, I have to use resin to keep it at around 0.5mg/l.

I've started dosing the tanks everyday instead of weekly. The tanks are 260l and 300l, I've started off using 5ml daily in each tank. Fingers crossed!

Paul Davies 23-06-2003 09:06 PM

Trace element %
 
Best of luck.
I followed Sears /Conlin fairly strictly for about 2 months adding zero
phosphate. I got a nice algae -free tank and my Fe and NO3 stabilised at 0.5
and 5ppm respectively.
I then added about 0.5ppm phosphate and WOW, plant growth took off almost
instantaneously, and NO3 and Fe dropped to zero overnight. Never seen
anything like it. Had to shovel in additives like mad to get a reading. Very
interesting!!

Good luck to you

Paul

"Skunky" wrote in message
...

Thanx for the reply Paul. I read the threads. I have mixed 2 scoops of
the trace element mix into 300ml of water, I've basically followed the
sears and conlin recipe. Although I have some KNO3, I have omitted it
as my NO3 levels in both tanks range between 10-25mg/l due to
reasonable fish load. As for PO4, I have to use resin to keep it at
around 0.5mg/l.

I've started dosing the tanks everyday instead of weekly. The tanks are
260l and 300l, I've started off using 5ml daily in each tank. Fingers
crossed!


--
Skunky

'Peace On Earth.....And In The Water'
------------------------------------------------------------------------
posted via www.GardenBanter.co.uk



----== Posted via Newsfeed.Com - Unlimited-Uncensored-Secure Usenet

News==----
http://www.newsfeed.com The #1 Newsgroup Service in the World! 100,000

Newsgroups
---= 19 East/West-Coast Specialized Servers - Total Privacy via Encryption

=---



Skunky 23-06-2003 10:13 PM

That must have been amazing to see, I bet you thought there was something wrong with the test kits!

Can you recommend a good Fe test kit?

Paul Davies 24-06-2003 09:32 AM

Trace element %
 
Can't say I can recommend a good one. The one I've been using is
Nutrafin.All I can say for it is that if you add more iron to the tank, the
test colour goes deeper. With no iron, there is no colour. As for accuracy,
for about £3, what do you expect?

Paul
"Skunky" wrote in message
...

That must have been amazing to see, I bet you thought there was
something wrong with the test kits!

Can you recommend a good Fe test kit?


--
Skunky

'Peace On Earth.....And In The Water'
------------------------------------------------------------------------
posted via www.GardenBanter.co.uk



----== Posted via Newsfeed.Com - Unlimited-Uncensored-Secure Usenet

News==----
http://www.newsfeed.com The #1 Newsgroup Service in the World! 100,000

Newsgroups
---= 19 East/West-Coast Specialized Servers - Total Privacy via Encryption

=---




All times are GMT +1. The time now is 09:22 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
GardenBanter