Home |
Search |
Today's Posts |
#1
|
|||
|
|||
CO2 efficiency in hard water
Hi All,
I conducted today water testing with my red-sea test kit. The test took place before and at the early stage where the lights went on. However I think I have asked this before, but maybe I'll be enlightened a bit more now ;-) It is my 100 gallon planted tank with the following parameters - week ago I 've replaced 1/3 of the water. I do replace 1/3 of all water every 2 to 3 weeks. PH = 7.2 KH = 12 GH = 18 NH3,NO2,CL2 and FE are all = 0 The CO2 test kit presented CO2 level at over 40 PPM - At that point I've deserted this test I trust only the PH/KH which leads to a level of 23 PPM of CO2. I do use a pressurized system of CO2, however I don't really see the CO2 diffuses into the water, it is a ceramic diffuser and most the CO2 bubbles are not diffusing and are actually escaping into the atmosphere. I will mention though that the plants and fish are happy. The water I use are tap water. * The tap water PH and GH are the same as in the tank. KH however is 13-14 d. Questions: 1. Does a CO2 system is actually needed in hard water, assuming water is replaced every 2 weeks and water parameters will not really change. PH is rather stable. 2. Should I target to higher levels of CO2? (well ph will slightly drop and my crypts will melt...) 3. Does any of the other parameters in hard water can effect the CO2 dissolved levels ? 4. In hard water levels I know that some plants will have trouble processing the Macro and Micro nutritients. 5. FE levels are 0 can there be a process which the FE will bind itself to other thing rather than to plants? 6. Is it correct to link between CO2 levels and hard water or should I look for a new direction? Sorry for the long mail. Thanks, Amit brucker |
#2
|
|||
|
|||
CO2 efficiency in hard water
Amit wrote:
1. Does a CO2 system is actually needed in hard water, assuming water is replaced every 2 weeks and water parameters will not really change. PH is rather stable. Your CO2 system is working fine. If it were not working, your pH would be about 8 at night, reflecting atmospheric equilibrium of about 3ppm CO2 with your 12 KH. 2. Should I target to higher levels of CO2? (well ph will slightly drop and my crypts will melt...) 22ppm is pretty good. 3. Does any of the other parameters in hard water can effect the CO2 dissolved levels ? The actual relationship is that the CO2 level and the KH determine the pH, assuming no pH altering chemicals have been added. Therefore, measuring pH and KH allow you to deduce your CO2. To answer your question, no other parameters have a major effect. 4. In hard water levels I know that some plants will have trouble processing the Macro and Micro nutritients. Plants prefer hard water to soft water. Calcium and Magnesium, the mojor components of GH, are necessary plant nutrients. Consider yourself lucky. 5. FE levels are 0 can there be a process which the FE will bind itself to other thing rather than to plants? I cannot answer this. Check out the nutirent deficiency charts to see if you have iron deficiency symptoms: http://www.csd.net/~cgadd/aqua/art_plant_nutrient.htm 6. Is it correct to link between CO2 levels and hard water or should I look for a new direction? What problem are you trying to solve? You said that both plants and fish are happy. Does this not make you happy too? |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
high efficiency Solar Cell GH | Orchids | |||
high efficiency Solar Cell GH | Orchids | |||
Efficiency of Commercial CO2 Reactors | Freshwater Aquaria Plants | |||
Is capitalism's efficiency a curse? | sci.agriculture | |||
Temik efficiency delay | sci.agriculture |