GardenBanter.co.uk

GardenBanter.co.uk (https://www.gardenbanter.co.uk/)
-   Lawns (https://www.gardenbanter.co.uk/lawns/)
-   -   Resin (Plastic) Plant Pot (https://www.gardenbanter.co.uk/lawns/193176-resin-plastic-plant-pot.html)

Kate 10-08-2010 02:51 AM

Resin (Plastic) Plant Pot
 
I have noticed that many stores do not sell the bases (can't think of
the official name) that go with plant pots anymore.

Therefore, I won't be drilling holes in the bottom of this pot for
drainage. I will be putting small rocks on the bottom for drainage and
planting a dwarf alberta spruce in it.

Has anyone done this and did the tree survive?

Thanks.

Kate

Frank 10-08-2010 12:35 PM

Resin (Plastic) Plant Pot
 
On Aug 9, 9:51*pm, Kate wrote:
I have noticed that many stores do not sell the bases (can't think of
the official name) that go with plant pots anymore.

Therefore, I won't be drilling holes in the bottom of this pot for
drainage. *I will be putting small rocks on the bottom for drainage and
planting a dwarf alberta spruce in it.

Has anyone done this and did the tree survive?

Thanks.

Kate


If pot were sold for use with a base it would already have holes in
it. I assume pot sold without holes is not made for a base. Some I
have like this outside, I drill holes in side about half way down to
prevent flooding if there is a lot of rain. Rock bottom is not going
to help if pot is full of water.

Kate 10-08-2010 06:41 PM

Resin (Plastic) Plant Pot
 
On 8/10/2010 4:35 AM, Frank wrote:
On Aug 9, 9:51 pm, wrote:
I have noticed that many stores do not sell the bases (can't think of
the official name) that go with plant pots anymore.

Therefore, I won't be drilling holes in the bottom of this pot for
drainage. I will be putting small rocks on the bottom for drainage and
planting a dwarf alberta spruce in it.

Has anyone done this and did the tree survive?

Thanks.

Kate


If pot were sold for use with a base it would already have holes in
it. I assume pot sold without holes is not made for a base. Some I
have like this outside, I drill holes in side about half way down to
prevent flooding if there is a lot of rain. Rock bottom is not going
to help if pot is full of water.

Thank you so much for this reply.

I think I will return the pot. If I drill holes in the sides, it will
ruin the look of the pot, plus it is sitting in front of my garage and
the driveway could be stained badly, eventually, with the affects of
Miracle Gro., etc., added to the watering can.

Frank 10-08-2010 07:24 PM

Resin (Plastic) Plant Pot
 
On 8/10/2010 1:41 PM, Kate wrote:
On 8/10/2010 4:35 AM, Frank wrote:
On Aug 9, 9:51 pm, wrote:
I have noticed that many stores do not sell the bases (can't think of
the official name) that go with plant pots anymore.

Therefore, I won't be drilling holes in the bottom of this pot for
drainage. I will be putting small rocks on the bottom for drainage and
planting a dwarf alberta spruce in it.

Has anyone done this and did the tree survive?

Thanks.

Kate


If pot were sold for use with a base it would already have holes in
it. I assume pot sold without holes is not made for a base. Some I
have like this outside, I drill holes in side about half way down to
prevent flooding if there is a lot of rain. Rock bottom is not going
to help if pot is full of water.

Thank you so much for this reply.

I think I will return the pot. If I drill holes in the sides, it will
ruin the look of the pot, plus it is sitting in front of my garage and
the driveway could be stained badly, eventually, with the affects of
Miracle Gro., etc., added to the watering can.


Probably best. Judicious watering if in the house would be OK but
outside rain will flood it and water log it.

Eggs Zachtly 11-08-2010 02:32 AM

Resin (Plastic) Plant Pot
 
Kate said:

I have noticed that many stores do not sell the bases (can't think of
the official name) that go with plant pots anymore.


They're called "saucers". And, I've never seen a store, that sold planters (of
any material), that didn't also stock the appropriately sized saucer.


Therefore, I won't be drilling holes in the bottom of this pot for
drainage. I will be putting small rocks on the bottom for drainage and
planting a dwarf alberta spruce in it.

Has anyone done this and did the tree survive?


You're not going to be achieving any sort of "drainage" by putting a bunch of
rocks at the bottom of the planter. All you will do is:

A. Make the container much heavier than it needs to be. (Might as well have
bought one that was actually carved from stone, instead of an imposter.) =)

B. Create an environment that keeps the roots of the plant in a saturated state.
The rocks and the potting mix aren't going to stay in nice, neat, separated
layers. The potting mix is going to seep down through the rocks, displacing...

You guessed it! The water that has no place to go. So, now, the water table is
rising, simply by the potting mix pushing it up. This process gets sped it up by
the dry potting mix above, absorbing the water rising from below (wicking).
Pretty soon (after many fewer waterings than you think), the entire pot has
become saturated, and with no way for the water to be removed, the plants, in
essence, drown.

You MUST provide drainage that will adequately remove the excess water from the
container. If you don't want to use it properly to contain live plants, then buy
a quality "fake" plant to put in it.

--

Eggs

-I went to a seafood disco rave last week.... and pulled a mussel.

Kate 17-08-2010 08:36 AM

Resin (Plastic) Plant Pot
 
On 8/10/2010 6:32 PM, Eggs Zachtly wrote:
Kate said:

I have noticed that many stores do not sell the bases (can't think of
the official name) that go with plant pots anymore.


They're called "saucers". And, I've never seen a store, that sold planters (of
any material), that didn't also stock the appropriately sized saucer.


Therefore, I won't be drilling holes in the bottom of this pot for
drainage. I will be putting small rocks on the bottom for drainage and
planting a dwarf alberta spruce in it.

Has anyone done this and did the tree survive?


You're not going to be achieving any sort of "drainage" by putting a bunch of
rocks at the bottom of the planter. All you will do is:

A. Make the container much heavier than it needs to be. (Might as well have
bought one that was actually carved from stone, instead of an imposter.) =)

B. Create an environment that keeps the roots of the plant in a saturated state.
The rocks and the potting mix aren't going to stay in nice, neat, separated
layers. The potting mix is going to seep down through the rocks, displacing...

You guessed it! The water that has no place to go. So, now, the water table is
rising, simply by the potting mix pushing it up. This process gets sped it up by
the dry potting mix above, absorbing the water rising from below (wicking).
Pretty soon (after many fewer waterings than you think), the entire pot has
become saturated, and with no way for the water to be removed, the plants, in
essence, drown.

You MUST provide drainage that will adequately remove the excess water from the
container. If you don't want to use it properly to contain live plants, then buy
a quality "fake" plant to put in it.

Sorry for this late reply, but you are right on.

I decided against this pot. Walmart and Lowe's did not have the right
sized saucer.

Thanks for your input. Much appreciated.

Kate 17-08-2010 08:37 AM

Resin (Plastic) Plant Pot
 
On 8/10/2010 11:24 AM, Frank wrote:
On 8/10/2010 1:41 PM, Kate wrote:
On 8/10/2010 4:35 AM, Frank wrote:
On Aug 9, 9:51 pm, wrote:
I have noticed that many stores do not sell the bases (can't think of
the official name) that go with plant pots anymore.

Therefore, I won't be drilling holes in the bottom of this pot for
drainage. I will be putting small rocks on the bottom for drainage and
planting a dwarf alberta spruce in it.

Has anyone done this and did the tree survive?

Thanks.

Kate

If pot were sold for use with a base it would already have holes in
it. I assume pot sold without holes is not made for a base. Some I
have like this outside, I drill holes in side about half way down to
prevent flooding if there is a lot of rain. Rock bottom is not going
to help if pot is full of water.

Thank you so much for this reply.

I think I will return the pot. If I drill holes in the sides, it will
ruin the look of the pot, plus it is sitting in front of my garage and
the driveway could be stained badly, eventually, with the affects of
Miracle Gro., etc., added to the watering can.


Probably best. Judicious watering if in the house would be OK but
outside rain will flood it and water log it.

True, and I will end up with roots that are rotting.


All times are GMT +1. The time now is 09:09 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
GardenBanter