Battery for Moisture Detector
 

On 4/5/2016 8:03 PM, wrote:

On this thread battery life was never mentioned. You just want to
prove how big a prick you are.
Stormin Moron.


Thank you for displaying your true personality.

--
..
Christopher A. Young
learn more about Jesus
.. www.lds.org
..
..

Battery for Moisture Detector
 

On Tue, 5 Apr 2016 22:19:05 -0400, Stormin Mormon
wrote:

On 4/5/2016 8:03 PM, wrote:

On this thread battery life was never mentioned. You just want to
prove how big a prick you are.
Stormin Moron.


Thank you for displaying your true personality.
I asked you a question about your response, and you chose to not
answer the question, and be a prick instead. I call a spade a spade,
and a moron a moron.

Battery for Moisture Detector
 

On 4/5/2016 10:42 PM, wrote:
On Tue, 5 Apr 2016 22:19:05 -0400, Stormin Mormon
wrote:

On 4/5/2016 8:03 PM, wrote:

On this thread battery life was never mentioned. You just want to
prove how big a prick you are.
Stormin Moron.


Thank you for displaying your true personality.
I asked you a question about your response, and you chose to not
answer the question, and be a prick instead. I call a spade a spade,
and a moron a moron.

Well, the gentle readers on this list can decide
for them selves.

--
..
Christopher A. Young
learn more about Jesus
.. www.lds.org
..
..

Battery for Moisture Detector
 

On Mon, 04 Apr 2016 20:14:17 -0400, wrote:

On Mon, 04 Apr 2016 18:50:51 -0400, Micky
wrote:

On Mon, 4 Apr 2016 15:29:56 -0400, Frank "frank wrote:

On 4/4/2016 3:00 PM, Snuffy "Hub Cap" McKinney wrote:
I've got a moisture detector that takes a 9v battery, and it says not to use an alkaline battery. Never seen that type of warning before. Anyone know why an alkaline battery is not recommended?

Thanks.


I know that different battery materials can have slightly different
voltage but nominally alkaline and carbon-zinc are the same.

They're a different size, however. iirc carbon-zinc are shorter.

You sure about that??
Lithium and other rechargeables tend to be shorter, but zinc chloride
and alkalines are generally the same.

I don't remember for sure which one is shorter but in 9v, one is.

I can't use an alkaline battery in one of my voltmeters. I have to
use a standard battery. Because it's shorter. So I guess it's the
carbon zinc that is shorter.

(If it's not shorter is more narrow, but I'm sure it's shorter.)

Battery for Moisture Detector
 

wrote in message ...
On Tue, 5 Apr 2016 22:19:05 -0400, Stormin Mormon
wrote:

On 4/5/2016 8:03 PM, wrote:

On this thread battery life was never mentioned. You just want to
prove how big a prick you are.
Stormin Moron.


Thank you for displaying your true personality.
I asked you a question about your response, and you chose to not
answer the question, and be a prick instead. I call a spade a spade,
and a moron a moron.

I put him in my filter long ago. I only see his nonsense when someone else replies to it.

Battery for Moisture Detector
 

"Snuffy "Hub Cap" McKinney" wrote in message ...
I've got a moisture detector that takes a 9v battery, and it says not to use an alkaline battery. Never seen that type of warning before. Anyone know why an alkaline battery is not recommended?

Thanks.

Thanks for the comments. I have tried to reach the mfr but no response so far. Will post whatever I find out.

Battery for Moisture Detector
 

"Snuffy "Hub Cap" McKinney" wrote in message ...
I've got a moisture detector that takes a 9v battery, and it says not to use an alkaline battery. Never seen that type of warning before. Anyone know why an alkaline battery is not recommended?

Thanks.

===

About the comments about differences in current between battery types. My understanding is that 9V is 9V and the current is determined by the resistance in the circuit.

Battery for Moisture Detector
 

On Sun, 17 Apr 2016 10:26:07 -0700, "Snuffy \"Hub Cap\" McKinney"
wrote:

"Snuffy "Hub Cap" McKinney" wrote in message ...
I've got a moisture detector that takes a 9v battery, and it says not to use an alkaline battery. Never seen that type of warning before. Anyone know why an alkaline battery is not recommended?

Thanks.

===

About the comments about differences in current between battery types. My understanding is that 9V is 9V and the current is determined by the resistance in the circuit.
Well, apparently Snuffy will not see my reply unless someone re-posts
it - but so be it. The current drawn is dependent on the resistance of
the circuit. This is true, but there is resistance in 2 very different
and separate parts of the circuit - the source and the load. The
"internal resistance" of the battery limits how much current the
battery can supply - irrespective of the "current draw" dictated by
the load resistance. If the internal resiatance of the battery is too
high, the voltage across the load will drop to well below 9 volts in
use. The power dissipated across the internal resistance of the
battery as heat will compromise the life of the battery, reducing the
total net power available from the battery to a fraction of what would
be available into a higher resistance, or lower "powered" load.

Battery for Moisture Detector
 

wrote in message ...
On Sun, 17 Apr 2016 10:26:07 -0700, "Snuffy \"Hub Cap\" McKinney"
wrote:

"Snuffy "Hub Cap" McKinney" wrote in message ...
I've got a moisture detector that takes a 9v battery, and it says not to use an alkaline battery. Never seen that type of warning before. Anyone know why an alkaline battery is not recommended?

Thanks.

===

About the comments about differences in current between battery types. My understanding is that 9V is 9V and the current is determined by the resistance in the circuit.
Well, apparently Snuffy will not see my reply unless someone re-posts
it - but so be it. The current drawn is dependent on the resistance of
the circuit. This is true, but there is resistance in 2 very different
and separate parts of the circuit - the source and the load. The
"internal resistance" of the battery limits how much current the
battery can supply - irrespective of the "current draw" dictated by
the load resistance. If the internal resiatance of the battery is too
high, the voltage across the load will drop to well below 9 volts in
use. The power dissipated across the internal resistance of the
battery as heat will compromise the life of the battery, reducing the
total net power available from the battery to a fraction of what would
be available into a higher resistance, or lower "powered" load.

Thanks for reposting. I missed it the first time. Would an alkaline battery be more susceptible to developing a high internal resistance than the el cheapo type?