How do I remove and replace the lawnmower blade?
 

When I try to turn the bolt, the blade turns with it. I'm sure there's a
simple way, but I haven't figured it out.

All help/advice is appreciated.

Thanks,
Brigitte

How do I remove and replace the lawnmower blade?
 

"Brigitte J." wrote in message
...
When I try to turn the bolt, the blade turns with it. I'm sure there's a
simple way, but I haven't figured it out.

All help/advice is appreciated.

Thanks,
Brigitte

I suppose I should have stated that it's a Craftsman Self-Propelled mower.

Thanks,
Brigitte

How do I remove and replace the lawnmower blade?
 

In article , Brigitte J.
wrote:

When I try to turn the bolt, the blade turns with it. I'm sure there's a
simple way, but I haven't figured it out.

Hold the blade, then turn the bolt. If you can't hold the blade with a
gloved hand, block it from turning with a scrap piece of wood.

djb

--
"I'll do the stupid thing first and then you shy people follow..." - Frank Zappa

How do I remove and replace the lawnmower blade?
 

Remove the wire from the spark plug first.

--
Mike H


"Dave Balderstone" wrote in message
...
In article , Brigitte J.
wrote:

When I try to turn the bolt, the blade turns with it. I'm sure there's
a
simple way, but I haven't figured it out.

Hold the blade, then turn the bolt. If you can't hold the blade with a
gloved hand, block it from turning with a scrap piece of wood.

djb

--
"I'll do the stupid thing first and then you shy people follow..." - Frank
Zappa

How do I remove and replace the lawnmower blade?
 

"Mike H" 1newsATstelliteDOTmailshellDOTcom wrote in message
...
Remove the wire from the spark plug first.

--
Mike H


"Dave Balderstone" wrote in message
...
In article , Brigitte J.
wrote:

When I try to turn the bolt, the blade turns with it. I'm sure
there's
a
simple way, but I haven't figured it out.

Hold the blade, then turn the bolt. If you can't hold the blade with a
gloved hand, block it from turning with a scrap piece of wood.

djb

--
"I'll do the stupid thing first and then you shy people follow..." -
Frank
Zappa

Yes, for God's sake disconnect that spark plug!

Somehow I was also wondering if that nut might be left-handed. I have a
Murray gas mower that I was going to pull the blade from and sharpen/balance
the blade.

How do I remove and replace the lawnmower blade?
 

"Brigitte J." wrote:

When I try to turn the bolt, the blade turns with it. I'm sure there's a
simple way, but I haven't figured it out.

All help/advice is appreciated.

Thanks,
Brigitte

To keep the blade from moving, I use a little gadget called "Blade
Buster" that I picked up at the local big box store. It works great and
is very simple to use. Here's a link to one for sale on the web:

http://www.gadgetcorner.com/hardw/blade/blade.htm

How do I remove and replace the lawnmower blade?
 

Nah, too involved.

What I do is slip a large spanner on the nut and then start the engine to
the lawnmower. The torque from the engine will unbolt the blade.

I guess I am going to get sued now (rolling eyes) - lol.

Seriously if you have to ask how to remove a blade from the lawnmower
probable you need to have a lawnmower shop do it for yah. Taking off the
blade is easy, it's torquing it down to ensure that it does not fly off is
the difficult part.

"Ermalina" wrote in message
...
"Brigitte J." wrote:

When I try to turn the bolt, the blade turns with it. I'm sure there's
a
simple way, but I haven't figured it out.

All help/advice is appreciated.

Thanks,
Brigitte

To keep the blade from moving, I use a little gadget called "Blade
Buster" that I picked up at the local big box store. It works great and
is very simple to use. Here's a link to one for sale on the web:

http://www.gadgetcorner.com/hardw/blade/blade.htm

How do I remove and replace the lawnmower blade?
 

iBuyMinis wrote:

Taking off the blade is easy, it's torquing it down to ensure
that it does not fly off is the difficult part.


"torquing it down" difficult?

1. You know your weight in pounds.

2. You know the length of the wrench in feet.

3. You know the desired torque in foot-pounds.

It's neither rocket science nor brain surgery.

How do I remove and replace the lawnmower blade?
 

Seriously if you have to ask how to remove a blade from the lawnmower
probable you need to have a lawnmower shop do it for yah. Taking off the
blade is easy, it's torquing it down to ensure that it does not fly off is
the difficult part.

some people might not have the strength to hold the blade while taking the nut
off or even taking the nut off even if the blade is locked into place...

How do I remove and replace the lawnmower blade?
 

Correct me if I'm wrong group but is it absolutely necessary to torque the
nut down? Won't the spinning of the crank torque the blade?

"Die Spammer" wrote in message
...
Seriously if you have to ask how to remove a blade from the lawnmower
probable you need to have a lawnmower shop do it for yah. Taking off the
blade is easy, it's torquing it down to ensure that it does not fly off
is
the difficult part.

some people might not have the strength to hold the blade while taking
the nut
off or even taking the nut off even if the blade is locked into place...

How do I remove and replace the lawnmower blade?
 

"iBuyMinis" wrote:
Correct me if I'm wrong group but is it absolutely necessary to torque
the nut down? Won't the spinning of the crank torque the blade?

Yep, just tight.

--
GO# 40 and F the french.
http://www.countryoforiginlabeling.com/french.html
----------------------------------------------------------------------
http://NewsReader.Com/
50 GB/Month

How do I remove and replace the lawnmower blade?
 

In article , Die Spammer
wrote:

some people might not have the strength to hold the blade while taking the
nut
off or even taking the nut off even if the blade is locked into place...

Then they probably don't have the strength to start the friggin' mower.

Yes, unplug the spark plug wire. And also make sure it's not just
hanging loose where it can contact the plug by accident (important
because the wires on mowers are shart and will swing toward the plug
after you pull it.

Basic small engine safety.

In any event, people as you describe should be invigorating their local
economy by hiring someone who has basic knowledge and skill in dealing
with simple machines.

Sigh. Does anyone else think that as automation permeats our lives we
get stupider?

djb

--
"There is no hell. There is only France." -- Frank Zappa

How do I remove and replace the lawnmower blade?
 

wrote:
Sigh. Does anyone else think that as automation permeats our lives we
get stupider?

"There is no hell. There is only France." -- Frank Zappa

It's all relative. (see sig file)

--
GO# 40 and F the french.
http://www.countryoforiginlabeling.com/french.html
----------------------------------------------------------------------
http://NewsReader.Com/
50 GB/Month

How do I remove and replace the lawnmower blade?
 

I disagree.

Division of labor creates job, professions, etc Automation in itself is an
end to a means.

"Dave Balderstone" wrote in message
news:240520031919287541% Sigh. Does anyone else think that as automation
permeats our lives we
get stupider?

How do I remove and replace the lawnmower blade?
 

any dummies would hold it with vice grips then use wrench dome




"Brigitte J." wrote in message
...
| When I try to turn the bolt, the blade turns with it. I'm sure
there's a
| simple way, but I haven't figured it out.
|
| All help/advice is appreciated.
|
| Thanks,
| Brigitte
|
|