Backflow preventer dripping
 

My irrigation system was installed in spring of 2002, and included a
RPZ type backflow preventer (Watts 009). This summer, it has
gradually developed a slow leak. It is dripping from the water outlet
on the bottom. It has never been exposed to freezing conditions.

Since it is only 2 years old, I can't imagine that the rubber seals
have failed already. What could cause this thing to fail so quick?
And can they be repaired?

Thanks,
John

Backflow preventer dripping
 

It is not unusual for these to develop leaks. Its in there nature the way
their designed. I have many checked at work annually and always have some
that need rebuilding. The state of Wisconsin requires a person to be a
certified technitian to rebuild backflow preventers. You need to check with
your State or local codes. They absolutely can be rebuilt.


"John Vannoy" wrote in message
om...
My irrigation system was installed in spring of 2002, and included a
RPZ type backflow preventer (Watts 009). This summer, it has
gradually developed a slow leak. It is dripping from the water outlet
on the bottom. It has never been exposed to freezing conditions.

Since it is only 2 years old, I can't imagine that the rubber seals
have failed already. What could cause this thing to fail so quick?
And can they be repaired?

Thanks,
John

Backflow preventer dripping
 

"Donald Guzzetta" wrote in message ...
It is not unusual for these to develop leaks. Its in there nature the way
their designed. I have many checked at work annually and always have some
that need rebuilding. The state of Wisconsin requires a person to be a
certified technitian to rebuild backflow preventers. You need to check with
your State or local codes. They absolutely can be rebuilt.


"John Vannoy" wrote in message
om...
My irrigation system was installed in spring of 2002, and included a
RPZ type backflow preventer (Watts 009). This summer, it has
gradually developed a slow leak. It is dripping from the water outlet
on the bottom. It has never been exposed to freezing conditions.

Since it is only 2 years old, I can't imagine that the rubber seals
have failed already. What could cause this thing to fail so quick?
And can they be repaired?

Thanks,
John



I've had mine stick occasionally too. Sometimes banging it a few
times with a hammer is all it takes. Otherwise, the top of mine comes
off easily. Don't remember exactly what I did, but basicly just took
the top off, checked inside, made sure everything moved ok and put it
back together and it worked fine.

Backflow preventer dripping
 

"Donald Guzzetta" wrote in message ...
It is not unusual for these to develop leaks. Its in there nature the way
their designed. I have many checked at work annually and always have some
that need rebuilding. The state of Wisconsin requires a person to be a
certified technitian to rebuild backflow preventers. You need to check with
your State or local codes. They absolutely can be rebuilt.


"John Vannoy" wrote in message
om...
My irrigation system was installed in spring of 2002, and included a
RPZ type backflow preventer (Watts 009). This summer, it has
gradually developed a slow leak. It is dripping from the water outlet
on the bottom. It has never been exposed to freezing conditions.

Since it is only 2 years old, I can't imagine that the rubber seals
have failed already. What could cause this thing to fail so quick?
And can they be repaired?

Thanks,
John



I've had mine stick occasionally too. Sometimes banging it a few
times with a hammer is all it takes. Otherwise, the top of mine comes
off easily. Don't remember exactly what I did, but basicly just took
the top off, checked inside, made sure everything moved ok and put it
back together and it worked fine.