GardenBanter.co.uk

GardenBanter.co.uk (https://www.gardenbanter.co.uk/)
-   Lawns (https://www.gardenbanter.co.uk/lawns/)
-   -   Mosquito control -- Standing water: how to drain water from tires. (https://www.gardenbanter.co.uk/lawns/91364-re-mosquito-control-standing-water-how-drain-water-tires.html)

Anthony Matonak 24-03-2005 01:45 PM

Mosquito control -- Standing water: how to drain water from tires.
 
The Bald Ass Prairie Farm rosielle@telus wrote:
"quietguy" wrote in message

much easier to just pop a desertspoon or so of kero in each tyre - stops
the mossies from breeding


Or just soap, they breed and the larva drown.


Or, don't store tires outside in the rain.

Anthony

Harry K 24-03-2005 02:26 PM


Anthony Matonak wrote:
The Bald Ass Prairie Farm rosielle@telus wrote:
"quietguy" wrote in

message

much easier to just pop a desertspoon or so of kero in each tyre -

stops
the mossies from breeding


Or just soap, they breed and the larva drown.


Or, don't store tires outside in the rain.

Anthony


And what is that bit about re-cycling?? Never heard of any effort to
set up bins for rubber.

Harry K


[email protected] 24-03-2005 10:10 PM

Tire parts can easily be placed into existing recycling-bins. Since the
sidewalls don't contain embedded steel-belts, the sidwalls would be
valued by recycing industries. "Buyback programs would be an even
better idea than just placing tire parts in recycling bins!"


Doug Miller 25-03-2005 12:09 AM

In article . com, wrote:
Tire parts can easily be placed into existing recycling-bins. Since the
sidewalls don't contain embedded steel-belts, the sidwalls would be
valued by recycing industries. "Buyback programs would be an even
better idea than just placing tire parts in recycling bins!"


Who's going to fund the buy-back programs?


--
Regards,
Doug Miller (alphageek at milmac dot com)

Nobody ever left footprints in the sands of time by sitting on his butt.
And who wants to leave buttprints in the sands of time?

GFRfan 25-03-2005 04:53 AM

Doug Miller wrote:
In article . com, wrote:

Tire parts can easily be placed into existing recycling-bins. Since the
sidewalls don't contain embedded steel-belts, the sidwalls would be
valued by recycing industries. "Buyback programs would be an even
better idea than just placing tire parts in recycling bins!"


Who's going to fund the buy-back programs?


--
Regards,
Doug Miller (alphageek at milmac dot com)



Why the tire companies of course. No! Wait! Then they'd raise the price
of their product and we, the consumer, would end up paying for it.

willshak 25-03-2005 12:16 PM

On 3/24/2005 9:26 AM US(ET), Harry K took fingers to keys, and typed the
following:

Anthony Matonak wrote:


The Bald Ass Prairie Farm rosielle@telus wrote:


"quietguy" wrote in


message


much easier to just pop a desertspoon or so of kero in each tyre -


stops


the mossies from breeding


Or just soap, they breed and the larva drown.


Or, don't store tires outside in the rain.

Anthony



And what is that bit about re-cycling?? Never heard of any effort to
set up bins for rubber.

Harry K


http://www.dnr.state.oh.us/recycling...rumbrubber.htm

--
Bill

[email protected] 25-03-2005 12:39 PM

"Tire parts can easily be placed into existing recycling-bins. Since
the
sidewalls don't contain embedded steel-belts, the sidwalls would be
valued by recycing industries. "

What a total moron. Every community that I'm aware of requires
recyclables to be seperated by type. And none of them accept tires or
tire parts as part of the std household recycling stream. Some will
take tires as part of a seperate special program, typically for a fee
and at a drop off location that is entirely seperate from the std
recycling pick up. And those are a headache to get rid of too. In
fact, here in NJ, the state recently instituted a tax on tires to help
pay for getting rid of them, because no one wants them.


Oscar_Lives 25-03-2005 06:43 PM


"GFRfan" wrote in message
news:mPM0e.16725$fn3.13880@attbi_s01...
Doug Miller wrote:
In article . com,
wrote:

Tire parts can easily be placed into existing recycling-bins. Since the
sidewalls don't contain embedded steel-belts, the sidwalls would be
valued by recycing industries. "Buyback programs would be an even
better idea than just placing tire parts in recycling bins!"


Who's going to fund the buy-back programs?


--
Regards,
Doug Miller (alphageek at milmac dot com)



Why the tire companies of course. No! Wait! Then they'd raise the price of
their product and we, the consumer, would end up paying for it.


Yeah, and they might start making tires that last longer and run better too,
so they can avoid the expensive recycling tax on cheap worn-out tires.



[email protected] 25-03-2005 10:20 PM


wrote:
"Tire parts can easily be placed into existing recycling-bins. Since
the
sidewalls don't contain embedded steel-belts, the sidwalls would be
valued by recycing industries. "

Every community that I'm aware of requires
recyclables to be seperated by type. And none of them accept tires or
tire parts as part of the std household recycling stream.


Here in CA, most types of clean waste (styrofoam one of the exceptions)
can be placed (and mixed-in) the recycling bins e.g., all the different
types of paper, plastics, metals, etc. Nothing has been said about
rubber or tire-parts.

Some will
take tires as part of a seperate special program, typically for a fee
and at a drop off location that is entirely seperate from the std
recycling pick up.


When new tires are put on cars, the tire-shops charge an extra-fee to
customers who opt not to deal with the old tires.

And those are a headache to get rid of too. In
fact, here in NJ, the state recently instituted a tax on tires to

help
pay for getting rid of them, because no one wants them.


Crumb-rubber is increasingly valued as a road-paving additive.
Steel-belts in tires may damage even the industrial-standard equipment
that grinds tires into crumb-rubber; another reason for tire-recycling
industries to consider the tire-parts free of steel-belts!


[email protected] 26-03-2005 01:18 AM

wrote:

Why would anyone "store" tires on their property? I've never seen this
but then I've never lived in a trailer park?


In PA, a tire store will give me $1 for every tire that I take away.
I could make a good living by "storing" 1 million tires.

Nick


Blake 26-03-2005 01:40 AM


"Anthony Matonak" wrote

Or, don't store tires outside in the rain.


Are you suggesting to store inside in the rain? Or bring them inside when
it's raining?


Anthony Matonak 26-03-2005 04:34 AM

Blake wrote:
"Anthony Matonak" wrote
Or, don't store tires outside in the rain.


Are you suggesting to store inside in the rain? Or bring them inside when
it's raining?


Why store tires at all? What are you saving them for? How many tires do
you have that you can't find a place for them under some kind of cover?
You don't have a tire dump in the state? You don't have a garage, barn,
shed, tarp, or anything else?

I see this kind of "question" along the same lines of "How do you keep
your meth lab from blowing up?" and "The stack of old car batteries in
my back yard is starting to leak into my cesspool, what can I do?".

Anthony

The Real Bev 26-03-2005 05:33 AM

Anthony Matonak wrote:

Blake wrote:
"Anthony Matonak" wrote
Or, don't store tires outside in the rain.


Are you suggesting to store inside in the rain? Or bring them inside when
it's raining?


Why store tires at all? What are you saving them for? How many tires do
you have that you can't find a place for them under some kind of cover?
You don't have a tire dump in the state? You don't have a garage, barn,
shed, tarp, or anything else?


It's good to keep one or two wheel-less tires around to tie to the front
or back of a car when you need to use one to push another.

I see this kind of "question" along the same lines of "How do you keep
your meth lab from blowing up?" and "The stack of old car batteries in
my back yard is starting to leak into my cesspool, what can I do?".


You've been spying in my neighborhood :-( You're wrong about the
cesspool, though, we were on city sewers long before we moved in 37
years ago. We did have a lab blow up up the street, though. Or maybe
it was just a small fire. Anyway, the hazmat team was there.

--
Cheers,
Bev
================================================== ===============
"The federal government has taken too much tax money from the
people, too much authority from the states, and too much liberty
with the Constitution." -- Ronald Reagan

Harry K 27-03-2005 03:31 AM


wrote:
Tire parts can easily be placed into existing recycling-bins. Since

the
sidewalls don't contain embedded steel-belts, the sidwalls would be
valued by recycing industries. "Buyback programs would be an even
better idea than just placing tire parts in recycling bins!"


By golly you're right. Lets see, there is "newspaper", there is
"cardboard" there is "steel cans" and over there "aluminum cans' Over
in that corner is the invisible bin for 'rubber'. In short, no, you
can't place it in existing bins, they don't exist...at least not in
this area.

Harry K


[email protected] 27-03-2005 02:34 PM

"Here in CA, most types of clean waste (styrofoam one of the
exceptions)
can be placed (and mixed-in) the recycling bins e.g., all the different

types of paper, plastics, metals, etc. Nothing has been said about
rubber or tire-parts. "

The fact that nothing has been said about tire parts or rubber pretty
much tells you that they don't want them in the recyclables, doesn't
it? I'm sure no one is regularly chopping up tires and putting them in
with the other standard recyclables. And if they did, what do you
think would happen to it when it gets to the recycling facility? Most
likely, it would get chucked into the stuff headed for the land fill.

I also find it interesting that in your area of CA you can just mix all
the recyclables together. It's very unusual to see paper mixed with
glass, cans etc. I would think this would make a big mess to try to
sort out. More typical is to have it seperated:

newpaper
mixed other paper
glass/cans/plastic

And event these typically have some restricitions. For example, glass
means containers, not window glass, and as you pointed out, plastic
means household containers, not styrofoam, etc. Some also require
glass seperated from metals.



All times are GMT +1. The time now is 12:49 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
GardenBanter