Ball Cocks
 

We have several ball cocks installed on the plumbing around our pond. They
have become quite hard to turn in order to shut down the water line. Does
anyone have any suggestions on some kind of a device or something, to make
them easier to turn? Thanks.
Kathy

Ball Cocks
 

"Jeff & Kathy Brown" wrote:

We have several ball cocks installed on the plumbing around our pond. They
have become quite hard to turn in order to shut down the water line. Does
anyone have any suggestions on some kind of a device or something, to make
them easier to turn? Thanks.

A tube of plumber's grease from the hardware store? The stuff they use
to lube valves and faucets.

Ball Cocks
 

From what I have read that is why they recommend you use a gate type valve.
The balls will eventually get hard to turn becuase the crud going through is
getting behind the ball when it is opened and closed.
Whatever you are going to try to put on them is going to end up in your
pond remember..

Lisa

"Jeff & Kathy Brown" wrote in message
...
We have several ball cocks installed on the plumbing around our pond.
They
have become quite hard to turn in order to shut down the water line. Does
anyone have any suggestions on some kind of a device or something, to make
them easier to turn? Thanks.
Kathy

Ball Cocks
 

yeah.. gates last for years. what we got on our spa. Ingrid

"Ted" wrote:

From what I have read that is why they recommend you use a gate type valve.
The balls will eventually get hard to turn becuase the crud going through is
getting behind the ball when it is opened and closed.
Whatever you are going to try to put on them is going to end up in your
pond remember..

Lisa

"Jeff & Kathy Brown" wrote in message
...
We have several ball cocks installed on the plumbing around our pond.
They
have become quite hard to turn in order to shut down the water line. Does
anyone have any suggestions on some kind of a device or something, to make
them easier to turn? Thanks.
Kathy






~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List Manager: Puregold Goldfish List
http://puregold.aquaria.net/
www.drsolo.com
Solve the problem, dont waste energy finding who's to blame
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Unfortunately, I receive no money, gifts, discounts or other
compensation for all the damn work I do, nor for any of the
endorsements or recommendations I make.

Ball Cocks
 

Mine stopped working and on disassembly I found out what hard water does to
plastic valves ball valves. The valves were hard to turn and would not shut
off. They had a build up of deposits in a couple of months that prevented
them from closing.

"Ted" wrote in message
...
From what I have read that is why they recommend you use a gate type
valve.
The balls will eventually get hard to turn becuase the crud going through
is
getting behind the ball when it is opened and closed.
Whatever you are going to try to put on them is going to end up in your
pond remember..

Lisa

"Jeff & Kathy Brown" wrote in message
...
We have several ball cocks installed on the plumbing around our pond.
They
have become quite hard to turn in order to shut down the water line.
Does
anyone have any suggestions on some kind of a device or something, to
make
them easier to turn? Thanks.
Kathy

Ball Cocks
 

Yes, but standard gates are not recommended for the pressure side of the
plumbing. They are usually used on the return sides.
Happy ponding,
Greg

--


"Ted" wrote in message
...
From what I have read that is why they recommend you use a gate type
valve.
The balls will eventually get hard to turn becuase the crud going through
is
getting behind the ball when it is opened and closed.
Whatever you are going to try to put on them is going to end up in your
pond remember..

Lisa

"Jeff & Kathy Brown" wrote in message
...
We have several ball cocks installed on the plumbing around our pond.
They
have become quite hard to turn in order to shut down the water line.
Does
anyone have any suggestions on some kind of a device or something, to
make
them easier to turn? Thanks.
Kathy

Ball Cocks
 

Yes, but standard gates are not recommended for the pressure side of the
plumbing. They are usually used on the return sides.
Happy ponding,
Greg

--


"Ted" wrote in message
...
From what I have read that is why they recommend you use a gate type
valve.
The balls will eventually get hard to turn becuase the crud going through
is
getting behind the ball when it is opened and closed.
Whatever you are going to try to put on them is going to end up in your
pond remember..

Lisa

"Jeff & Kathy Brown" wrote in message
...
We have several ball cocks installed on the plumbing around our pond.
They
have become quite hard to turn in order to shut down the water line.
Does
anyone have any suggestions on some kind of a device or something, to
make
them easier to turn? Thanks.
Kathy

Ball Cocks
 

Yes, but standard gates are not recommended for the pressure side of the
plumbing. They are usually used on the return sides.
Happy ponding,
Greg

--


"Ted" wrote in message
...
From what I have read that is why they recommend you use a gate type
valve.
The balls will eventually get hard to turn becuase the crud going through
is
getting behind the ball when it is opened and closed.
Whatever you are going to try to put on them is going to end up in your
pond remember..

Lisa

"Jeff & Kathy Brown" wrote in message
...
We have several ball cocks installed on the plumbing around our pond.
They
have become quite hard to turn in order to shut down the water line.
Does
anyone have any suggestions on some kind of a device or something, to
make
them easier to turn? Thanks.
Kathy

Ball Cocks
 

On Sat, 30 Aug 2003 11:35:44 -0400, "Jeff & Kathy Brown"
wrote:

We have several ball cocks installed on the plumbing around our pond. They
have become quite hard to turn in order to shut down the water line. Does
anyone have any suggestions on some kind of a device or something, to make
them easier to turn? Thanks.
Kathy

I thought this was sex spam and i just looked to see what the others
said. HAHA