Patching torn Butyl rubber liner?
 

I have a large chunk torn out of the side of my pond (dog went nuts?) that
I need to patch. The liner is 45-mil butyl rubber, and I have plenty of
material for a patch. But what's the concensus on patching cements or
tapes, and what's the best way to accomplish it? I was looking at The
Pondshop, and they have a kit they recommend for patching and seaming
liner:
http://www.pondshop.com/catalog/const.htm
Look for 03-SEAMKT, used with BCAU16 butyl caulk and single-sided tape.
It's not cheap, though, and maybe I'd be better off buying just the prep,
2-sided tape, etc., separately...

Dave

Patching torn Butyl rubber liner?
 

I patched a 2" round through hole with the standard patching material for a
roof from a home supply store "Menards" worked fine for me.

"Dave Bell" wrote in message
rea.net...
I have a large chunk torn out of the side of my pond (dog went nuts?) that
I need to patch. The liner is 45-mil butyl rubber, and I have plenty of
material for a patch. But what's the concensus on patching cements or
tapes, and what's the best way to accomplish it? I was looking at The
Pondshop, and they have a kit they recommend for patching and seaming
liner:
http://www.pondshop.com/catalog/const.htm
Look for 03-SEAMKT, used with BCAU16 butyl caulk and single-sided tape.
It's not cheap, though, and maybe I'd be better off buying just the prep,
2-sided tape, etc., separately...

Dave

Patching torn Butyl rubber liner?
 

"Dave Bell" wrote in message
rea.net...
I have a large chunk torn out of the side of my pond (dog went nuts?) that
I need to patch. The liner is 45-mil butyl rubber, and I have plenty of
material for a patch. But what's the concensus on patching cements or
tapes, and what's the best way to accomplish it? I was looking at The
Pondshop, and they have a kit they recommend for patching and seaming
liner:
http://www.pondshop.com/catalog/const.htm
Look for 03-SEAMKT, used with BCAU16 butyl caulk and single-sided tape.
It's not cheap, though, and maybe I'd be better off buying just the prep,
2-sided tape, etc., separately...

When I built my stream, I overlapped liner and used that big, fat, sticky
Becket double sided tape. The box said to wait 24 hours for proper setting.
I waited like 24 minutes, and have had a leak ever since. We're currently in
the process of fixing that. Anyway, my advice. The tape and some liner will
work great, just follow the instructions. If it were me, I'd also probably
seal the edges of the liner patch to be sure no water ever got to the tape,
just in case.

BV.

Patching torn Butyl rubber liner?
 

Where do you get double sided Becket tape?


"Benign Vanilla" wrote in message
...

When I built my stream, I overlapped liner and used that big, fat, sticky
Becket double sided tape. The box said to wait 24 hours for proper
setting.
I waited like 24 minutes, and have had a leak ever since. We're currently
in
the process of fixing that. Anyway, my advice. The tape and some liner
will
work great, just follow the instructions. If it were me, I'd also probably
seal the edges of the liner patch to be sure no water ever got to the
tape,
just in case.

BV.

Patching torn Butyl rubber liner?
 

"pixi" wrote in message
...
Where do you get double sided Becket tape?
snip

I got mine at Home Depot.

BV.