Pump problem...
 

I have a Laguna Powerjet 7000. It stopped working so I replace the impeller
and bushing. I ran fine, then when I unplugged it, and restarted it, it
doesn't pump. I pulled it apart and pulled out the impeller. Everything
looks fine. Before I reseal, I checked if it turns. Yep... until I unplug,
then replug. The impeller (still exposed) is turning erratically... almost
like it wants to backwards while turning forwards. So it kind of jiggles,
but manages to turn in one direction not achieving much.

Anyone know what's up?

- Prometheus

Pump problem...
 

In article
le.rogers.com,
Prometheus Xex wrote:

I have a Laguna Powerjet 7000. It stopped working so I replace the impeller
and bushing. I ran fine, then when I unplugged it, and restarted it, it
doesn't pump. I pulled it apart and pulled out the impeller. Everything
looks fine. Before I reseal, I checked if it turns. Yep... until I unplug,
then replug. The impeller (still exposed) is turning erratically... almost
like it wants to backwards while turning forwards. So it kind of jiggles,
but manages to turn in one direction not achieving much.

Anyone know what's up?

The impeller has separated from the magnet, sometimes you can epoxy
together again... but better to replace.

jay
Thu Jun 03, 2004




- Prometheus

Pump problem...
 

"Prometheus Xex" wrote in message t.cable.rogers.com...
I have a Laguna Powerjet 7000. It stopped working so I replace the impeller
and bushing. I ran fine, then when I unplugged it, and restarted it, it
doesn't pump. I pulled it apart and pulled out the impeller. Everything
looks fine. Before I reseal, I checked if it turns. Yep... until I unplug,
then replug. The impeller (still exposed) is turning erratically... almost
like it wants to backwards while turning forwards. So it kind of jiggles,
but manages to turn in one direction not achieving much.

Anyone know what's up?

- Prometheus

I had a similar problem years ago with a different make of pump and
used to turn on the pump then give the impeller a push with a cocktail
stick. It may be due to the rotor losing its magnetism.

Carl

Pump problem...
 

I had a Laguna Utility that had the same problem once. I had to leave it running
and then put the cover back. That was the only way to make it pump.

It doesn't do that any more.

Prometheus Xex wrote:

I have a Laguna Powerjet 7000. It stopped working so I replace the impeller
and bushing. I ran fine, then when I unplugged it, and restarted it, it
doesn't pump. I pulled it apart and pulled out the impeller. Everything
looks fine. Before I reseal, I checked if it turns. Yep... until I unplug,
then replug. The impeller (still exposed) is turning erratically... almost
like it wants to backwards while turning forwards. So it kind of jiggles,
but manages to turn in one direction not achieving much.

Anyone know what's up?

- Prometheus

Pump problem...
 

In article ,
Sean Dinh wrote:

I had a Laguna Utility that had the same problem once. I had to leave it
running
and then put the cover back. That was the only way to make it pump.

It doesn't do that any more.

Prometheus Xex wrote:


I spray the guts up with Silicone Lube... Seems to fix it...

Carl

--
--
http://www.cobaltbluefilms.com

Pump problem...
 

Prometheus Xex wrote:

I have a Laguna Powerjet 7000. It stopped working so I replace the impeller
and bushing. I ran fine, then when I unplugged it, and restarted it, it
doesn't pump. I pulled it apart and pulled out the impeller. Everything
looks fine. Before I reseal, I checked if it turns. Yep... until I unplug,
then replug. The impeller (still exposed) is turning erratically... almost
like it wants to backwards while turning forwards. So it kind of jiggles,
but manages to turn in one direction not achieving much.

Anyone know what's up?

- Prometheus



sounds like the bushing is either
tight or no good. does the impeller
shaft spin free when unplugged?





--
--
http://www.kencofish.com Ken Arnold,
401-831-5739 cell 401-225-0556
Importer/Exporter of Goldfish,Koi,rare Predators
Shipping to legal states/countries only!
Permalon liners, Oase & Supreme Pondmaster pumps


Linux (SuSE 8.2) user #329121
Please Note: No trees or animals were harmed in the
sending of this contaminant free message We do concede
that a signicant number of electrons may have been
inconvenienced ;)

Pump problem...
 

Sounds like it may be a broken impeller shaft.
I fixed mine with some good old JB weld.

It's run longer with the weld than without it.

Pump problem...
 

Read my posts... new impeller in unit... not broken.
- Xex

"matrix j" wrote in message
...
Sounds like it may be a broken impeller shaft.
I fixed mine with some good old JB weld.

It's run longer with the weld than without it.

Pump problem...
 

Yep... it spins free (with a bit of magnetic resistance).

Xex

"KenCo" wrote in message
...
Prometheus Xex wrote:

sounds like the bushing is either
tight or no good. does the impeller
shaft spin free when unplugged?

Pump problem...
 

"Prometheus Xex" wrote in message t.cable.rogers.com...
I have a Laguna Powerjet 7000. It stopped working so I replace the impeller
and bushing. I ran fine, then when I unplugged it, and restarted it, it
doesn't pump. I pulled it apart and pulled out the impeller. Everything
looks fine. Before I reseal, I checked if it turns. Yep... until I unplug,
then replug. The impeller (still exposed) is turning erratically... almost
like it wants to backwards while turning forwards. So it kind of jiggles,
but manages to turn in one direction not achieving much.

Anyone know what's up?

- Prometheus

The solution probably is a new impeller-magnet assembly. Last fall I
noticed that the tip at the the end was worn and for $28+ shipping got
a new one at
www.thatpetplace.com. The price may vary because my Laguna is the
5000.
Happy water gardening.

Pump problem...
 

On Fri, 04 Jun 2004 21:41:42 GMT, Prometheus Xex wrote:

Read my posts... new impeller in unit... not broken.

It could be one or more coils burnt out, maybe when the impeller broke
it oevrheated. Symptoms would be it will often need a flick to start it
up and once running it will be down on power. I think you said it was
doing that.

--
Regards - Rodney Pont
The from address exists but is mostly dumped,
please send any emails to the address below
e-mail ngpsm4 (at) infohitsystems (dot) ltd (dot) uk