Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Reducing size of hedge
There is a large hedge (acer, I think?) which I inherited, on the
boundary of my garden, and although it's regular and 'rectangular' in cross-section, is way bigger than necessary presumably due to insufficient trimming over the years. It's probably 9' tall and 6' deep (ie, across the boundary) and it's now very hard to reach the middle of the top to trim it. Not to mention the waste of garden space! What would happen if I attacked it ruthlessly to carve it down to about half the height and thickness? It would obviously look really crap initially, but would the leaves eventually regrow and make it look OK again? Or would it just die? Or is the hedge a write-off now? :-( David |
#2
|
|||
|
|||
Lobster wrote:
There is a large hedge (acer, I think?) Hang on, sorry, actually privet (I think!) David |
#3
|
|||
|
|||
Lobster writes:
Lobster wrote: There is a large hedge (acer, I think?) Hang on, sorry, actually privet (I think!) I'm reducing the size of one of mine slowly. When it started shooting back in the spring I started chopping out occasional upright branches, and cut the height down to about 6" lower than I wanted. The top has now sprouted and can now be kept trimmed to the new height, the sides are taking longer to fill in as the new shoots come in quicker with light, but as they do I'm taking out more of the outside branches to narrow the hedge. I'm told privet will take very drastic cutting back, so I could have done it all in one go, but I didn't want to lose the screening so I'm putting up with it looking scruffy between thinnings and will probably land up finishing it off next year. Anthony |
#5
|
|||
|
|||
Jaques d'Alltrades wrote:
The message from contains these words: I'm told privet will take very drastic cutting back, so I could have done it all in one go, but I didn't want to lose the screening so I'm putting up with it looking scruffy between thinnings and will probably land up finishing it off next year. Yes, you could cut privet back to a stump in the winter and have a (not very dense) knee-high hedge by the end of spring. Thanks for the replies - sounds encouraging! OK, so what's the best time of year to attack it, then? There are two criteria which may or may not be contradictory: first, maintaining the health of the hedge, and second, minimising the time during which it will look totally crap and the neighbours will be able to peer through and watch our every move ;-) David |
#6
|
|||
|
|||
In article ,
Lobster wrote: OK, so what's the best time of year to attack it, then? There are two criteria which may or may not be contradictory: first, maintaining the health of the hedge, and second, minimising the time during which it will look totally crap and the neighbours will be able to peer through and watch our every move ;-) Late winter or early spring. If you kill privet by cutting it back, I for one will be amazed. I don't recommend cutting a VERY old hedge back to a stump, but cutting it back to 1-2' high should not worry it at all. Regards, Nick Maclaren. |
#7
|
|||
|
|||
The message
from Lobster contains these words: OK, so what's the best time of year to attack it, then? There are two criteria which may or may not be contradictory: first, maintaining the health of the hedge, and second, minimising the time during which it will look totally crap and the neighbours will be able to peer through and watch our every move ;-) Late winter - early spring, say, end of feb to beginning of March. (I'd say...) -- Rusty Emus to: horrid dot squeak snailything zetnet point co full-stop uk http://www.users.zetnet.co.uk/hi-fi/ |
#8
|
|||
|
|||
Lobster wrote: Jaques d'Alltrades wrote: The message from contains these words: I'm told privet will take very drastic cutting back, so I could have done it all in one go, but I didn't want to lose the screening so I'm putting up with it looking scruffy between thinnings and will probably land up finishing it off next year. Yes, you could cut privet back to a stump in the winter and have a (not very dense) knee-high hedge by the end of spring. Thanks for the replies - sounds encouraging! OK, so what's the best time of year to attack it, then? There are two criteria which may or may not be contradictory: first, maintaining the health of the hedge, and second, minimising the time during which it will look totally crap and the neighbours will be able to peer through and watch our every move ;-) Two comments: Don't forget to cut back further than you want the final size to be. (Otherwise you will have huge stumps at the surface of the hedge). Secondly, can you lay a privet hedge the way you lay a hawthorn hedge? Even if you can't, I assume you are going to cut something like five feet off the top, and two feet off either side. You might be able to get some sense of privacy by weaving the branches from the top into what remains. |
#9
|
|||
|
|||
The message .com
from "Martin Bonner" contains these words: Two comments: Don't forget to cut back further than you want the final size to be. (Otherwise you will have huge stumps at the surface of the hedge). Secondly, can you lay a privet hedge the way you lay a hawthorn hedge? I suspect that the growth form of privet would make it an unrewarding enterprise, though I'm sure it is possible. Even if you can't, I assume you are going to cut something like five feet off the top, and two feet off either side. You might be able to get some sense of privacy by weaving the branches from the top into what remains. Possibly - some of the shoots may be long and straight, but I think that would be unnecessary if the work is carried out in the very early spring. -- Rusty Emus to: horrid dot squeak snailything zetnet point co full-stop uk http://www.users.zetnet.co.uk/hi-fi/ |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Reactor size VS Tank Size? | Freshwater Aquaria Plants | |||
Reducing transpiration | Edible Gardening | |||
reducing evaporation from any water or soil surface | Ponds | |||
safely reducing KH | Freshwater Aquaria Plants | |||
Reducing the lawn area | Australia |