GardenBanter.co.uk

GardenBanter.co.uk (https://www.gardenbanter.co.uk/)
-   United Kingdom (https://www.gardenbanter.co.uk/united-kingdom/)
-   -   ATCO Viscount (https://www.gardenbanter.co.uk/united-kingdom/184931-atco-viscount.html)

Adders21 19-06-2009 12:42 PM

ATCO Viscount
 
Hi All,

I inherited an ATCO Viscount petrol mower.
I have used it for about a year with no problems. Yesterday I ws cutting the grass when it suddenley stopped. No noise or drama it just stopped. I checked the fuel which was fine. I tried pulling the starter cord but it would not pull. I checked the oil which was low but covered the end of the dip stick by about 5mm.

I let it cool down over night and tried again this morning but it's still the same.
Any suggestions?

Ian

'Mike'[_4_] 19-06-2009 03:52 PM

ATCO Viscount
 


--
..
"Adders21" wrote in message
...

Hi All,

I inherited an ATCO Viscount petrol mower.
I have used it for about a year with no problems. Yesterday I ws
cutting the grass when it suddenley stopped. No noise or drama it just
stopped. I checked the fuel which was fine. I tried pulling the starter
cord but it would not pull. I checked the oil which was low but covered
the end of the dip stick by about 5mm.

I let it cool down over night and tried again this morning but it's
still the same.
Any suggestions?

Ian




--
Adders21


Lead jumped off spark plug or come too loose to make contact

Mike



Adders21 21-06-2009 09:24 AM

Hi Mike,

The lead is intact. It's the pull cord that will not pull.

Cheers
Ian

'Mike'[_4_] 21-06-2009 10:01 AM

ATCO Viscount
 


--
..
"Adders21" wrote in message
...

"'Mike'[_4_ Wrote:
;851978"]--
..
"Adders21" wrote in message
...-

Hi All,

I inherited an ATCO Viscount petrol mower.
I have used it for about a year with no problems. Yesterday I ws
cutting the grass when it suddenley stopped. No noise or drama it
just
stopped. I checked the fuel which was fine. I tried pulling the
starter
cord but it would not pull. I checked the oil which was low but
covered
the end of the dip stick by about 5mm.

I let it cool down over night and tried again this morning but it's
still the same.
Any suggestions?

Ian




--
Adders21-

Lead jumped off spark plug or come too loose to make contact

Mike

Hi Mike,

The lead is intact. It's the pull cord that will not pull.

Cheers
Ian


Sorry Ian didn't read the posting properly :-((

For the machine to stop dead like that, and for the pull cord not to work, I
would say that the machine picked something up and jammed it solid.

Not familiar with that machine but I would remove the lead from the spark
plug (FOR SAFETY REASONS) and check out the blades and inlet. Try to turn
the blades (thus the remove the spark plug lead) you should be able to turn
them. Whilst there, you might find a stick or something jammed.

If nothing there, it sounds like a seize up inside :-(((

Hope that helps.

Mike



'Mike'[_4_] 21-06-2009 10:19 AM

ATCO Viscount
 


--
..
"'Mike'" wrote in message
...


--
.
"Adders21" wrote in message
...

"'Mike'[_4_ Wrote:
;851978"]--
..
"Adders21" wrote in message
...-

Hi All,

I inherited an ATCO Viscount petrol mower.
I have used it for about a year with no problems. Yesterday I ws
cutting the grass when it suddenley stopped. No noise or drama it
just
stopped. I checked the fuel which was fine. I tried pulling the
starter
cord but it would not pull. I checked the oil which was low but
covered
the end of the dip stick by about 5mm.

I let it cool down over night and tried again this morning but it's
still the same.
Any suggestions?

Ian




--
Adders21-

Lead jumped off spark plug or come too loose to make contact

Mike

Hi Mike,

The lead is intact. It's the pull cord that will not pull.

Cheers
Ian


Sorry Ian didn't read the posting properly :-((

For the machine to stop dead like that, and for the pull cord not to work,
I would say that the machine picked something up and jammed it solid.

Not familiar with that machine but I would remove the lead from the spark
plug (FOR SAFETY REASONS) and check out the blades and inlet. Try to turn
the blades (thus the remove the spark plug lead) you should be able to
turn them. Whilst there, you might find a stick or something jammed.

If nothing there, it sounds like a seize up inside :-(((

Hope that helps.

Mike


Having checked out the machine on
http://www.gooshing.co.uk/lawn_mower..._rotary_mower/ I
would definitely say that it is a drive problem, either to the rotor, or the
fan sending the grass to the collector, or the drive wheels. As it is the
one motor driving all of these, I would say that a jam, being some foreign
object or a bearing, would stop the motor dead and make it solid.

If you are mechanical, see if you can check out each bit on its own for
movement by disconnecting other bits.

THAT, is the limit of my knowledge, sorry :-((

Please come back and tell us what the problem was when you get it running
again :-)

Mike



'Mike'[_4_] 21-06-2009 10:24 AM

ATCO Viscount
 


--
..
"'Mike'" wrote in message
...


--
.
"'Mike'" wrote in message
...


--
.
"Adders21" wrote in message
...

"'Mike'[_4_ Wrote:
;851978"]--
..
"Adders21" wrote in message
...-

Hi All,

I inherited an ATCO Viscount petrol mower.
I have used it for about a year with no problems. Yesterday I ws
cutting the grass when it suddenley stopped. No noise or drama it
just
stopped. I checked the fuel which was fine. I tried pulling the
starter
cord but it would not pull. I checked the oil which was low but
covered
the end of the dip stick by about 5mm.

I let it cool down over night and tried again this morning but it's
still the same.
Any suggestions?

Ian




--
Adders21-

Lead jumped off spark plug or come too loose to make contact

Mike
Hi Mike,

The lead is intact. It's the pull cord that will not pull.

Cheers
Ian


Sorry Ian didn't read the posting properly :-((

For the machine to stop dead like that, and for the pull cord not to
work, I would say that the machine picked something up and jammed it
solid.

Not familiar with that machine but I would remove the lead from the spark
plug (FOR SAFETY REASONS) and check out the blades and inlet. Try to turn
the blades (thus the remove the spark plug lead) you should be able to
turn them. Whilst there, you might find a stick or something jammed.

If nothing there, it sounds like a seize up inside :-(((

Hope that helps.

Mike


Having checked out the machine on
http://www.gooshing.co.uk/lawn_mower..._rotary_mower/ I
would definitely say that it is a drive problem, either to the rotor, or
the fan sending the grass to the collector, or the drive wheels. As it is
the one motor driving all of these, I would say that a jam, being some
foreign object or a bearing, would stop the motor dead and make it solid.

If you are mechanical, see if you can check out each bit on its own for
movement by disconnecting other bits.

THAT, is the limit of my knowledge, sorry :-((

Please come back and tell us what the problem was when you get it running
again :-)

Mike


For your interest, when I had a large piece of land in Leicester, I had a
http://www.oldlawnmowerclub.co.uk/mo...76-atcorot.htm 'somewhat' much
more basic than yours, which took bramble and lots of nasties down to
eventual grass where I grazed horses!! Now two blocks of flats on it.

Mike



Muddymike 21-06-2009 06:18 PM

ATCO Viscount
 
"Adders21" wrote in
message
...-

Hi All,

I inherited an ATCO Viscount petrol mower.
I have used it for about a year with no problems. Yesterday
I ws
cutting the grass when it suddenley stopped. No noise or
drama it
just
stopped. I checked the fuel which was fine. I tried pulling
the
starter
cord but it would not pull. I checked the oil which was low
but
covered
the end of the dip stick by about 5mm.

I let it cool down over night and tried again this morning
but it's
still the same.
Any suggestions?


Does this machine have an engine/blade safety brake? If so I
would think the cable that contols that may have broken or become
disconnected.

Mike



Pete C[_2_] 21-06-2009 09:33 PM

ATCO Viscount
 

Sounds very like spanner time Ian. :(
--
Pete C
London UK



Pete Stockdale 22-06-2009 05:04 PM

ATCO Viscount
 

"Pete C" wrote in message
...

Sounds very like spanner time Ian. :(




--

Rather like my rideon what suddenly refused to start last weekend.
Fortunately - I had completed the cutting apart from the last pass.
So many possible causes with such machines.

It is with paid spannerman as we speak (:----(

Regards
Pete
www.thecanalshop.com








All times are GMT +1. The time now is 05:09 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
GardenBanter