turf cutters ?
 

I am planning to hire a turf cutter to remove my lawn - anyone have any
advice, tips or words of wisdom for using it ?

thanks

Jones

don't start it up on concrete or tarmac

another Jones

"rocyn" wrote in message
...
I am planning to hire a turf cutter to remove my lawn - anyone have any
advice, tips or words of wisdom for using it ?

thanks

Jones

are they easy to use ?


"Tonka" wrote in message
...
don't start it up on concrete or tarmac

another Jones

"rocyn" wrote in message
...
I am planning to hire a turf cutter to remove my lawn - anyone have any
advice, tips or words of wisdom for using it ?

thanks

Jones

On Sun, 15 Aug 2004 20:32:09 +0000, rocyn wrote:

are they easy to use ?


yes and no. In theory they should partly propel themselves, but in
practice you end up using a fair bit of muscle in driving the thing.
You'll find you spend the first half hour or so working out a system that
suits you. For example, you might cut a strip about 6 metres long, roll it
up, then discover it's too heavy to lift. You need to factor in about the
same time for moving the cut turf as you do cutting. The thing to remember
is it's a turf CUTTER, not LIFTER, and you can zoom around cutting the
turf, which stays neatly cut on the lawn until you roll it up and move it
somewhere. To sum up, I'd say the cutting bit doesn't take as much time as
the rolling up, lifting and moving of the cut turf. And the whole thing,
cutting and lifting, is very good exercise!

In message , Dougie
Nisbet writes
On Sun, 15 Aug 2004 20:32:09 +0000, rocyn wrote:

are they easy to use ?


yes and no. In theory they should partly propel themselves, but in
practice you end up using a fair bit of muscle in driving the thing.
You'll find you spend the first half hour or so working out a system that
suits you. For example, you might cut a strip about 6 metres long, roll it
up, then discover it's too heavy to lift. You need to factor in about the
same time for moving the cut turf as you do cutting. The thing to remember
is it's a turf CUTTER, not LIFTER, and you can zoom around cutting the
turf, which stays neatly cut on the lawn until you roll it up and move it
somewhere. To sum up, I'd say the cutting bit doesn't take as much time as
the rolling up, lifting and moving of the cut turf. And the whole thing,
cutting and lifting, is very good exercise!

Not all of them are self propelled. I'd hate to use one that isn't
though. The one I hired had adjustable depth of cut. Problem I found was
that the blade was narrower than the wheel base, so cut your next turf
b4 removing the previous one.
I would agree, turf is *very heavy*, especially if the soil underneath
is damp/wet clay, so be prepared to cut it up into short lengths.
--
hugh
Reply to address is valid at the time of posting