On 16/09/15 23:04, Bigal wrote:
Chris J Dixon;1016144 Wrote:
I want to make a simple rectangular planter (1), and don't want
it finished in any of the available garish preservative colours.
I thought I might use Wikes treated sawn gravel boards, with
fence posts for the corner pillars. I'm happy to go with a rough
sawn appearance.
I see that planters on sale seem to come with a plastic sheet
liner, though some of them are made of surprisingly thin timber.
Should I add a clear preservative, do I need a liner, or is it
probably better (and cheaper) to simply use substantial timber,
and replace when it decays?
(1) 600 mm x 800 mm, to match the concrete surround on a manhole
cover.
Chris
--
Chris J Dixon Nottingham UK
Plant amazing Acers.
I have done quite a bit of fencing this year using tanalised timber.
Newly treated it looks quite green, but soon changes to a pleasant light
brown. However, the treatment doesn't penetrate very far into the wood
and it can start to rot from the cut edges. I have further treated it
with creocote which is obtainable in light or dark brown and it doesn't
seem to affect any plants growing next to it. You can always line it
with plastic if need be, making sure that you have drainage. If you are
putting it over the manhole cover just make sure that it isn't too heavy
to move should the need arise.
+1
I was surprised at the poor penetration when I made some raised beds
from tanalised gravel boards. In the end I put on several coats of
water-based preservative, paying particular attention to the sawn edges.
Only time will tell how successful (or not) this preservative is.
--
Jeff