On 1/9/2016 5:46 PM, T wrote:
On 01/09/2016 08:29 AM, George Shirley wrote:
On 1/9/2016 2:37 AM, T wrote:
Hi All,

Speedqueen AWS44NW top loading washer.

Spin is very, very loud. And it is leaking:

Over here I have found:
http://www.fixya.com/support/t535654...se_spins_cycle



Well, the only time the washer (speedqueen) is noisy
on spin is if one or both the bearings are faulty.
Normally when you get a leak, it means the hub/flange
and seal kit need replacement and this also includes
the top bearing because when soap suds leak past the
seal assembly it drips directly onto the bearing. The
acidic properties in the soap suds eats the grease in
the bearing which ends up becoming defective. One can
also get an anoying squeek if a bottom base gasket is
worn or removed. This would be audible even on wash
cycle.Conclusion, check the bearing on top of gearbox.

Sounds exactly like what is happening.

I found this on how to repair the stinker:


http://www.ehow.com/how_12217109_cha...en-washer.html

Way, way over my head. I think a repairman would be at it
for several weeks, if he ever could get the parts. This
all would probably cost a fortune to fix.

Anyway, a repair like this is a major, major job and is
beyond my abilities and tools.

Would you repair it anyway or replace it?

Many thanks,
-T

I would replace it, not worth the $$$ to repair. Remind me to tell y'all
about the time I glued a washing machine tub to my knee while I was
replacing the teflon parts that maintained the spin.

Shades of Clark Griswald stapling his sleeve to the roof!

Did the glue even stick to the teflon?

I was holding the tub between my legs while I was gluing the teflon on
it, seems I didn't wait long enough for it to stick. Lost a little skin
using rubbing alcohol to get it off me but it did stick to the teflon.

I worked 47 years in refineries and chemical plants, we always had large
sticks of varying thickness teflon to use on pumps, motors, etc. I still
have a stash of teflon out in the shop and I retired in 2007. Waste not,
want not again. Wife is giving me hell about my stash of odd nuts,
bolts, and screws, leftover from projects. I bought the templates for
both American Standard and metric and am slowly sorting them out into
different containers. Plastic peanut jars are just right for long screws
and bolts and last a good time if not exposed to sunlight. One of our
grandson's came by this afternoon and perused the collection and found
just what he needed, beats going to the big box store and looking for
them and finding out you can't really afford them. G

I think you're supposed to wait until you're old and decrepit before you
expose your foibles to the world. I'm old but not quite decrepit yet but
can pretend to be with people I don't like, "Huh, what did you say?"
Great fun for old people to yank someone's chain.