View Single Post
  #6   Report Post  
Old 09-06-2003, 06:32 AM
bnd777
 
Posts: n/a
Default Timber for building planters/raised beds?

You could aquire some pallets and simply use the 4"by 2" lengths of timber
they provide for free
It will take quite a few years before they rot away and theres nothing to
stop you treating the outside with the new Creosote replacement or similar


"Martin Richards" wrote in message
...
Skimming the scary thread about the procedures for pressure treating

timber
prompts me to ask something I've been pondering for a few days. I want to
build a planter/raised bed sort of thingummy* at the side of the house to
liven up an area that's currently used for the bins and not much more. It
gets some sun at this time of year, but is pretty cool and damp the rest

of
the time, so the timber's got to be able to put up with some less than

ideal
conditions, even before it's full of soil.

Any thoughts on what to use, both wood-wise and as a treatment? I'd
wondered about using decking or something similar simply for the ease of
obtaining it, though I confess I've not got as far as a detailed
investigation of B&Q, let alone the local timber merchants to see what the
options are. I'd also wondered about lining the planter with plastic to
protect the wood from the soil, but it sounds like it might also be good

for
protecting the soil from the wood!

Cheers,

Martin.

* the space is between two houses, perhaps 2m wide reducing to 1.5m over

4m
or so, so I figure with the rubble and foundations that must be under

there,
just lifting the slabs and digging a bed is going to be a non-starter.
Also, I want to plant "against" next door's wall, so obviously I don't

want
to pile up soil over their damp proof course ;-)