Judy wrote:
Goodmorning, hopefully I can explain this, we have two ponds side by
side. I want to enlarge one of them and join them. Since the old
liners are pretty dirty I thought I would replace one liner to the
pond I want to enlarge and join the other pond by laying that same
liner on top of the old one. Do you think this would work? Can this
cause a problem with a liner on top of a old liner later on? The
reason I would not prefer to pull it up is the second pond is actually
attached to a third small pond with a barrier between. The smaller
pond was built to be used as a holding pond for new fish. Thanks.


--
aure it can be done in one of the incarnations of my pond the first one
i think i had put gravel on the bottom, it leaked (poor quality liner)
in the next incarnaton when i elarged it some i found the gravel to be
to much of a pain to remove so i put the new larger butyl rubber liner
over the old one gravel and all. that worked for a long time until
later when I decided to go from a 2000 gal to a 8000 galon i took a
backhoe an d dug both liners out







John Rutz
Z5 New Mexico

never miss a good oportunity to shut up

see my pond at:

http://www.fuerjefe.com