Poulan blower starts only by priming?
"TOM KAN PA" wrote in message
...
After starting and running great, one day the Poulan 432 PRO blower would
not
start. After pulling the cord about a dozen times, I removed the spark
plug. It
was dry, it should have been wet with the gasoline/oil mix. This indicates
it's
not getting fuel.
So I removed the air cleaner and primed it. It ran until the primer fuel
ran
out. I did this several times and then all of a sudden, it kept running. I
did
all the leaf blowing I wanted to do, shut it down, and immediately tried
to
start it. Nope, didn't even fire. Took off the air cleaner, did the primer
thing, and eventually it ran.
What the hell could be causing this?
Had about the same thing happen to me while using my Echo Trimmer.
I finally emptied out the old gas/oil mix and replaced it with a fresh mixed
batch of gas/oil. Problem solved.
The gas/oil mix I had been using had been mixed properly and was not very
old, but the unit would not run on it after a few uses.
Shepherd
|