Thread
:
Fork Sharpening
View Single Post
#
6
19-10-2003, 10:12 PM
Jaques d'Altrades
Posts: n/a
Fork Sharpening
The message
from
(Robert E A Harvey) contains these words:
Hi Rajinder
No, if you can't sharpen them then they won't wear very quickly.
You've been the victim of low-cost manufacture. The best solution is
to use an angle grinder, with care not to overheat and draw the temper
of the tines. An engineering shop might help
Wrong way round, rRobert - you temper steel by making it softer.
--
Rusty Hinge
horrid·squeak&zetnet·co·uk
http://www.users.zetnet.co.uk/hi-fi/tqt.htm
Reply With Quote