We are installing a new pond that is block, lined with granite tile.
The pump as two "ins" into the pond. One in the veggie filter and one in
the main pond area. Because the pond bottom is granite tile and there
is a bottom drain I was thinking have using the inlet to the main area
to sweep the bottom and push debris toward the drain. To do that I was
going to take a pipe and put holes in it and lay it horizontal at the
bottom edge.
Is there a problem with water entering at the very bottom of the pond
(3' deep)?
Is there a problem stirring up the muck, or would it be better to let it
sit there?
Thanks,
Mark B.