I put two 4" bulkheads into a 75 gallon stock tank. The way I did it
was to come in through the bottom for the very reason you state.

Oingofan wrote in message . ..
I have a 150 gallon Rubbermaid stock tank and am planning on putting
in a 4" Bulkhead through the lower side of it from my bottom drain.
From what I can see, the bulkhead is just slightly bigger such that it
won't completely be flat against the surface. The area I was
initially going to put in it was opposite the drain.

Has anyone put in a 4" Bulkhead into a 150 gallon stock tank in the
lower part of the tank? If so, how did you do it? Thx!
Oingofan