In message , Tom
writes
Having recently moved to a new (old) house if you see what I mean, I need to
relocate the 8X6ft glasshouse (left by the previous owner) to another part
of the garden.
I've just finished laying the concrete base and I intend removing the glass
and dismantling the alu frame which looks in a reasonable condition.
When I moved ours, I left the frame in one piece (glass out) , and a few
of us just lifted it up and moved it.
However I would like to replace the galvanised W clips and S clips with new
SS ones and I have already located a source of supply for these,
however, the existing rubber seals which fitted between the glass and the
alu frame are perished and I would like to replace them.
I would like to replace them with an U section flex material which could be
slotted over the glass edges and mitred with a sharp knife on the corners
prior to fitting the glass in the frame, I believe this is a better way of
cushioning the glass against slight wind movement and would also spread the
point load to which the glass edges are subjected to by the W clips.
Not convinced this is at all necessary, but if you do want it someone
over on uk.d-i-y may know of something
--
Chris French
|