Doug Steckel wrote:
Hello all,

I'm getting some conflicting advice on the best mix to use for setting fence
posts for a 6ft vinyl privacy fence. I've been told that any Quikrete mix
(like the #1101) will set up if poured dry. I've also been told that the
fast setting the fast setting #1004 is far better. Someone even told me that
the non-fast setting will only have half the strength of the red bag, fast
setting mix if poured dry. I'd like to save some money if possible but don't
want to sacrifice strength over the years as this fence will catch lots of
wind over the years.

Any advice?

Pouring it dry works if there's enough water in the
ground to saturate the dry concrete. Don't count on it.
Doing the job right is only marginally harder. Pour the
bag in, then add water with a hose or bucket and stir.