Drip Irrigation
I installed drip irrigation and need some help with a problem.
I have (from faucet) backflow preventer, filter, pressure regular, hose
thread to 1/2" poly tubing.
The 1/2 polytubing is the distribution and runs about 80 ft. There are about
30 places where I have 1/4 dripline coming off and running to plants. Each
run of 1/4 is 4 ft max. The dripline is rated to 30psi and I used a 25 PSI
regulator.
So, turn on the water and instead of the 1/4 drip line dripping - it sprays
water 3 ft in the air.
I change to a 15PSI regulator - same deal, water sprays a little less but
still shooting a stream and not dripping.
I change to a 10PSI regulator- same deal.
What have I done wrong, why is this stuff spraying and not dripping?
Thanks for any help.
|