"Jim Conklin" wrote in message
k.net...
Folks I think I'm having a problem getting CO2 to diffuse into my
tank. My well water right out of the tap is very soft and acidic: about a
pH of 6.2, a KH of 80ppm and a GH of 75. (Perfect for Discus, which I
keep.) I have a small CO2 tank connected with silicon tubing. I put the
outlet tube into the inlet of my Rena Filstar canister filter. I give the
55 gallon tank about 12 hours of light with two 65 watt compact flourcent
bulbs. But I'm still troubled by 'black-green' algae and minimal plant
growth. I keep the water at 85F. I fertilize regularly with Trace and
Flourish and keep the Nitrate level at 20ppm.

I've tried all different types of plants and while they survive and
grow a bit, there is no growth such as I see in pictures of other
hobbyist's tanks. Any advise or suggestions on how to get the CO2 to stay
in the water or what I could be doing wrong is appreciated. From the
specifications above above I'd think the plants should be growing out of
the tank! Thanks for any help.

Jim,

What are your CO2 levels, ie. what is your PH level after adding CO2? Where
is your spraybar output? How are your Phosphate levels?

I have a 55 gallon tall with 2*96 and my plant growth is pretty good. My PH
is around 7.8ish in the tank and 6.8 with CO2. I run the CO2 into the
venturi input of my Penguin powerheads that I use for RUGF. The Ludwigia
and other plants grow like weeds at this CO2 level. I'm currently suffering
from a fair amount of GSA (Green Spot Algae), probably due to lack of
Nitrates. My Nitrates stay around 10 ppm naturally.