Something like this:
http://www.rotonics.com/tanks/Accessories.htm
You need the threaded & gasket parts to hold pressure -
Home Depot & Lowe's probably have it - if not, go to a plumbing
supply ...
Fittings
RMI Bulkhead Fittings:
Standard EPDM Gaskets.
1/2" - 4" PVC Bulkhead Fittings with EPDM Gaskets.
3/4" - 3" Polypropylene Bulkhead Fittings with EPDM Gaskets.
Viton Gaskets are available upon request.
Gene
wrote in message
...
How do I install a spigot on these.
I searched Google and found instructions that include cutting a large hole
in the top and then securing the spigot on the inside with some type lock
nut.
Would it work to cut a hole a little smaller that the threaded end of the
faucet and using some type epoxy?
Will the pressure blow it out?
thanks
steven