55 Gallon Plastic Barrels
wrote in message
...
How do I install a spigot on these.
I searched Google and found instructions that include cutting a large hole
in the top and then securing the spigot on the inside with some type lock
nut.
Would it work to cut a hole a little smaller that the threaded end of the
faucet and using some type epoxy?
Will the pressure blow it out?
thanks
steven
Threaded and gasketed will be more easily disassembled in the event of a
clog. If your big-box stores don't have what you need try Crump Plumbing,
open 7 days. 8647 Rockwood Ln (behind Waterloo Ice House on Burnet),
512-454-6622
No affiliation, just a satisfied customer.
--
Mike Harris
Austin TX
|