I knew there was gonna be a problem when you wrote: "put in the bathtub",
at least you shut the door, etc. ;o)

Btw, I've never stored my Becketts wet and have never had a problem. The
Demo Pond uses an Ebara and every spring we have to manually rotate the
impeller before it will run. Do you think storing it wet would prevent
that? I hate to think of the bother of doing so. ~ jan


Today I pulled my new pump out of the bucket of water that I was storing it
in to put in the bathtub to make sure it was still running all right. I
have the bathtub about 3/4's full and had the pump standing on end with the
side nozzle discharge open.

I turned to plug it in and as soon as the connection was made the pump
starting rotating the water in the tub (4,300 GPH) and then all of a sudden
it started to move and before I could catch it , it laid on it side and shot
a stream of water 6 feet plus in to the air. Thank the Lord that the tub is
also the shower stall and the shower doors were closed because it shot water
every where before I got it unplugged.

I guess it is safe to say that it is working fine.

Tom L.L.
"John Rutz" wrote in message
...
well it quit snowing so I got my plumbing rerouted and turned on all
three pumps all the plants are showing some signs of growth so maybe
spring is finaly here for real


--
John Rutz

I'm not Porg am not am not am so
see my pond at:
http://www.fuerjefe.com




See my ponds and filter design:
http://users.owt.com/jjspond/

~Keep 'em Wet!~
Tri-Cities WA Zone 7a
To e-mail see website