View Single Post
  #3   Report Post  
Old 06-06-2007, 05:47 PM posted to uk.rec.gardening
David \(Normandy\) David \(Normandy\) is offline
external usenet poster
 
First recorded activity by GardenBanter: May 2007
Posts: 314
Default Adhesive for Pond Liner


"Bob Hobden" wrote in message
...

"topo" wrote ...
Putting a new pond liner in for someone probably PVC type and need to
stick it up and over surrounding cemented wall which has paving slabs
on top ...... I will then over cap with new top slabs etc.
What is the best adhesive to use ? I plan to insert the liner over the
old for a bit more protection ..... Is this a good idea ? Any tips
would be most helpful


PVC liner always cracks just above the water line due to UV radiation. One
cure is to bring the liner up behind the top bricks so it doesn't get any
sunlight.
Putting one liner over another is OK as long as the first liner was fitted
properly and there aren't too many creases. You can purchase underliner
which helps smooth out any problems and is strong enough to resist
stone/root damage.

--
Regards
Bob Hobden
17mls W. of London.UK


While it is good to use an old liner to protect a new liner, you need to
puncture the old liner first to allow any water ingress to escape, otherwise
you will end up with a water bed! Any water getting between the two liners
just lifts the upper one.

David.