On Sun, 10 Jun 2007 16:21:31 CST, "Bill Stock"
wrote:

I need to bury two large barrels (36x24) below the ground, but I can't do
too much collateral damage while digging the hole. I was thinking about
using a post hole digger to try and keep the sides as straight as possible.
The soil is hard clay below 1', so I don't expect too much slippage, but
there will be some.

Any brighter ideas?

Take your time if you do it by hand. I took several days digging a
hole for three barrels, over 6' long and 2' wide allowing me to get
into the hole with a mattock for loosening the clay. You mention
slippage, I don't have permafrost here and didn't have any
shifting/slippage after filling. Four inch PVC pipe and bulkheads
that connect the barrels probably helped, since they are pretty
stout.

Regards,

Hal