View Single Post
  #4   Report Post  
Old 07-12-2008, 10:46 PM posted to uk.rec.gardening
Gopher Gopher is offline
external usenet poster
 
First recorded activity by GardenBanter: Nov 2008
Posts: 364
Default Turnpike off topic

In message
,
Judith in France writes
On Dec 7, 12:13 pm, Gopher wrote:
In message
,
Judith in France writesYou might
remember that I asked whether I can still use Turnpike as I
was no longer with Demon. The opinion was divided and all seemed to
hinge on whether or not I had a Universal licence. A very clever chap
took a look at my posting on urg about 12 years ago and from the
information given in the header, could say, confidently, that I had a
Universal Licence, yipee!!!! Now all I want is the site ID from Demon
so that I can start using it.


Judith


Hello Judith,

I've been following your journey in demon.ip.turnpike.support and your
tapping of the pool of knowledge and help available there. FWIW I am an
ex Demonite having been with them since 1994-ish and received TP when I
first set up my small "system". I upgraded as newer versions came out
and stopped at TP6.05 which I still have hence no fee was/is necessary
as I had the original U licence. I had no disks or any support data when
I swapped to Zen but found my site ID somehow - I cannot recall exactly
from where but will try to check back to find out how. If I'm successful
I'll let you know. I seem to recall it was extremely simple. Anyway, TP
works perfectly with my new ISP -- so don't give up hope. Messrs Hall,
Clayton etc. will come to the rescue ... I feel sure.

Good luck,
--
Gopher .... I know my place!


Hi, nice to se you in here. Thanks for the info above, I am hopeful
that I will get the site ID and then I can dump Google, it has its
good points but I prefer Turnpike. At least the question over the
licence was solved, I do have a Universal Licence which means I don't
have to buy another.

Why not stay and tell us about your gardening exploits?

Judith


Got it! Both your Site ID and Site Key are in Connect.ini, which should
be located in the Turnpike folder in Program Files. Just double click
the file and it will open into Notepad. But **don't** change anything in
there.

Hope this helps.
--
Gopher .... I know my place!