Hello all,

I have now maintained my 29g planted tank for a little over a year and am
ready to take the leap to a larger tank. Since this is my first foray into
a borderline large tank, I am curious if I am forgetting anything.

I will be setting up a 75g fairly heavily planted tank. This is what I am
currently thinking of getting. Any thoughts or recommendations would be
appreciated.

-AH supply 4 x 55 watt power compact light kit and one of their finished
enclosures, I doubt that I am crafty enough to build one.

-One of Dave Gomberg's CO2 setups.

-Eheim professional canister filters - either the 2026 or the 2028, not
certain which would be best.

-Not sure what I should use as a substrate. I have read a fairly good chunk
of the archives, but their doesn't seem to be a consensus.

- Thermometer and heaters (I was thinking 2 x 250 watt would be appropriate?

Thanks for any recommendations you might make,

Zach

Seriously, it's not that hard to make your own enclosure. I did, and I'm
really not that handy with wood (or anything for that matter.) I used a
hand saw to cut the wood, screws and glue to put it all together and stain
and eurthane to protect it. Mine wasn't even square on the insides, but it
worked after a little adjustment and looks ok.
I really think you can do it, especially if you can handle setting up and
maintaining any planted aquarium. The only advantage to the premade one is
that it's done all ready (duh) and it *might* look a little nicer than
yours. If you have a spetacular looking tank, people won't notice if your
top isn't square, or that you accidently mismeasured, so you had to reglue a
piece of wood for the top (as I did)

Daniel

ps: I use flourite and gravel mixed for my substrate.

"Zach" wrote in message
...
Hello all,

I have now maintained my 29g planted tank for a little over a year and am
ready to take the leap to a larger tank. Since this is my first foray
into
a borderline large tank, I am curious if I am forgetting anything.

I will be setting up a 75g fairly heavily planted tank. This is what I am
currently thinking of getting. Any thoughts or recommendations would be
appreciated.

-AH supply 4 x 55 watt power compact light kit and one of their finished
enclosures, I doubt that I am crafty enough to build one.

-One of Dave Gomberg's CO2 setups.

-Eheim professional canister filters - either the 2026 or the 2028, not
certain which would be best.

-Not sure what I should use as a substrate. I have read a fairly good
chunk
of the archives, but their doesn't seem to be a consensus.

- Thermometer and heaters (I was thinking 2 x 250 watt would be
appropriate?

Thanks for any recommendations you might make,

Zach

I was thinking about getting the free DIY enclosure plans from AH when I got
the lights, and then ordering the enclosure if needed. I don't know which
concerns me more, trying to make an enclosure or trying to wore the
lights...hmmm...I have to have an electrician friend somewhere.

Thanks for the reply,

Zach
"daniel godwin" wrote in message
t...
Seriously, it's not that hard to make your own enclosure. I did, and I'm
really not that handy with wood (or anything for that matter.) I used a
hand saw to cut the wood, screws and glue to put it all together and stain
and eurthane to protect it. Mine wasn't even square on the insides, but
it
worked after a little adjustment and looks ok.
I really think you can do it, especially if you can handle setting up and
maintaining any planted aquarium. The only advantage to the premade one
is
that it's done all ready (duh) and it *might* look a little nicer than
yours. If you have a spetacular looking tank, people won't notice if your
top isn't square, or that you accidently mismeasured, so you had to reglue
a
piece of wood for the top (as I did)

Daniel

ps: I use flourite and gravel mixed for my substrate.

"Zach" wrote in message
...
Hello all,

I have now maintained my 29g planted tank for a little over a year and
am
ready to take the leap to a larger tank. Since this is my first foray
into
a borderline large tank, I am curious if I am forgetting anything.

I will be setting up a 75g fairly heavily planted tank. This is what I
am
currently thinking of getting. Any thoughts or recommendations would be
appreciated.

-AH supply 4 x 55 watt power compact light kit and one of their finished
enclosures, I doubt that I am crafty enough to build one.

-One of Dave Gomberg's CO2 setups.

-Eheim professional canister filters - either the 2026 or the 2028, not
certain which would be best.

-Not sure what I should use as a substrate. I have read a fairly good
chunk
of the archives, but their doesn't seem to be a consensus.

- Thermometer and heaters (I was thinking 2 x 250 watt would be
appropriate?

Thanks for any recommendations you might make,

Zach

"Zach" wrote:

I don't know which concerns me more, trying to make an enclosure
or trying to wore the lights...hmmm...I have to have an electrician
friend somewhere.

I just bought a lighting kit from AH, and it includes a basic wiring
plan, as well as an advanced one for retrofit installations. The plans
are pretty straightforward, and clearly designed with the
non-electrician in mind. So long as you're careful, you shouldn't have
any problem wiring the setup.

Not sure what I should use as a substrate. I have read a fairly good
chunk of the archives, but their doesn't seem to be a consensus.

Seachem Flourite is an excellent substrate for a planted tank, but I
don't envy you the price tag of enough to cover the bottom of the size
tank you're talking about.

Thermometer and heaters (I was thinking 2 x 250 watt would be
appropriate?

I don't know about sizes, but get Ebo-Jager brand on the heaters. I
wish I had done that initially. I bought a Jalli submersible titanium
heater, which had the really nice feature of the temperature control
being outside the tank, but the stupid thing died less than two months
after I got it.

--
www.ericschreiber.com

seachem also makes a gray substrate, onyx sand, that i'm switching to from
flourite. i found the flourite a bit brassy after having it for a few
months. a lfs has tanks with onyx, flourite, "normal" sand, something
black... i found the onyx sand a pleasantly neutral color which let the
plants and fish show their stuff best. others have recommended it as easier
to plant due to its finer granules.

good luck

jtm

--
Remove NOSPAM for email replies
"Eric Schreiber" wrote in message
...
"Zach" wrote:

I don't know which concerns me more, trying to make an enclosure
or trying to wore the lights...hmmm...I have to have an electrician
friend somewhere.

I just bought a lighting kit from AH, and it includes a basic wiring
plan, as well as an advanced one for retrofit installations. The plans
are pretty straightforward, and clearly designed with the
non-electrician in mind. So long as you're careful, you shouldn't have
any problem wiring the setup.

Not sure what I should use as a substrate. I have read a fairly good
chunk of the archives, but their doesn't seem to be a consensus.

Seachem Flourite is an excellent substrate for a planted tank, but I
don't envy you the price tag of enough to cover the bottom of the size
tank you're talking about.

Thermometer and heaters (I was thinking 2 x 250 watt would be
appropriate?

I don't know about sizes, but get Ebo-Jager brand on the heaters. I
wish I had done that initially. I bought a Jalli submersible titanium
heater, which had the really nice feature of the temperature control
being outside the tank, but the stupid thing died less than two months
after I got it.

--
www.ericschreiber.com

if you're going to look at flourite also take a look at onyx sand also made
by seachem.

i liked flourite at first but the orangy/brown is starting to wear on me. i
went down to a lfs the other day and saw a lot of tanks one of which had
onyx sand in it and i liked it a lot. it's like a dark slate grey color and
plants and fish look nice against it regardless of their color.

nice fine grain for ease of planting.

good luck

jtm

--
Remove NOSPAM for email replies