Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Sprinklers - Any metal machinists around here?
I've got an improvement to a metal sprinkler head that I own, and don't have the tools to make the part I need to fix/improve it. The parts I'm talking about are the two metal sleeves/collars which control when the sprinkler switches directions. Over time, the collars loosen up and the sprinkler starts to drift, because the collar starts turning around the shaft... Maybe some of you know what I'm talking about? You set the sprinkler to water the grass along your front curb, carefully setting the sleeves/collars to make sure you don't waste any water on the street, and look out five minutes later and see that you're watering the street, spraying cars that pass by as the sleeves slip around the shaft of the sprinkler? It ****es me off that this is at least the fourth or fifth heavy-duty metal sprinkler head that I've bought and it has the exact same problem as all the others. I have a perfect solution to the problem, but don't have the expertise in metalwork to make it. Anybody interested? Here's a picture of what I'm talking about. The two pieces are highlighted in gold. http://www.elroysemporium.com/jpg/sprinkler1.jpg My solution is a long screw which goes down through the middle of the horseshoe-shaped collar, with a large thumbscrew at the end which is used to loosen and tighten the collar against the shaft. Has anybody seen a sprinkler head with the above modification? If so, gimme the URL to buy one. If not, let's talk about making one... -- Elroy Willis www.elroysemporium.com |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
What goes around, comes around... | United Kingdom | |||
Nothing I've got around here seems to winter very well | Garden Photos | |||
Metal pipe found digging in garden - any advice please? | United Kingdom | |||
is somebody still around here? | Ponds | |||
Metal weights around plants - toxic? | Freshwater Aquaria Plants |