Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Help: Removing rust spots from grey river rocks.
I have a large quantity of grey Mexican river rocks that have aquired
rust spots of varying degree on their surfaces. Is there a way to remove these spots without destroying the surface of the rocks? To email replace orchids with shaw |
#2
|
|||
|
|||
Help: Removing rust spots from grey river rocks.
Thanks to all.
Just for the info of others CLR did not remove the rust from the rocks. Talking to various landscape suppliers in their experience nothing will take out rust from rocks. Of course that could be because they want me to buy new rocks. Again thanks to all. On Fri, 27 Feb 2004 19:55:14 GMT, Phisherman wrote: On Fri, 27 Feb 2004 00:12:22 GMT, Gideon Singer wrote: I have a large quantity of grey Mexican river rocks that have aquired rust spots of varying degree on their surfaces. Is there a way to remove these spots without destroying the surface of the rocks? To email replace orchids with shaw Purchase a product that removes rust. Naval Jelly, CLR, Zud, The Works, all remove rust. Most of these contain oxalic acid. But, I would not uses any of these if you intend to use the rocks in a fish pond. To email replace orchids with shaw |
#3
|
|||
|
|||
Help: Removing rust spots from grey river rocks.
Gideon Singer wrote in message . ..
Thanks to all. Just for the info of others CLR did not remove the rust from the rocks. .... Then the only alternative is to abrade the surface carefully to retain the contours. --Don't- use a steel brush. There are various flexible grinding discs out there. Try one on a rock and see what happens. The surface should eventually weather to grey. You may have to remove a good bit of rock if the stone is porous. Wear good eye protection if you try this. J. Del Col |
#4
|
|||
|
|||
Help: Removing rust spots from grey river rocks.
Gideon Singer wrote in message . ..
Thanks to all. Just for the info of others CLR did not remove the rust from the rocks. .... Then the only alternative is to abrade the surface carefully to retain the contours. --Don't- use a steel brush. There are various flexible grinding discs out there. Try one on a rock and see what happens. The surface should eventually weather to grey. You may have to remove a good bit of rock if the stone is porous. Wear good eye protection if you try this. J. Del Col |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|