Home |
Search |
Today's Posts |
|
#1
|
|||
|
|||
Hard starting Briggs & Stratton 3.0 hp lawnmower engine
Since the engine starts on a splash of gas, that suggests
choke problems, or bad gasket between the carb and the engine. I've worked on a couple of motors which had NO gasket between the carb and the engine. The outside air comes in through the space, and the choke doesn't work properly. Been a while since I ordered any Briggs parts, I don't know of any online places. -- Christopher A. Young Learn more about Jesus www.lds.org .. "muzician21" wrote in message ... On May 24, 9:57 am, "Stormin Mormon" wrote: Please let us know how things work out. If you get it going, or not. Either way, please write again. That way, we can learn also. I tried pouring about a tablespoon or so of gas in the carb before starting and it fired up immediately, much easier to pull than I ever recall it being. Couldn't believe how silky smooth it started. Apparently not a thing wrong with the solid state ignition. Apparently it's the cold fuel delivery issue. Looking into a replacement diaphragm for it. Anyone have a suggestion for online parts houses for older B&S stuff? The model on this carb is 092908 0571 01. One of the local places that carries Snapper had a listing for 092908 0571 99 which going by the exploded line drawings on his system looks to be the same carb. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
5.5 HP Briggs & Stratton Mower Engine Soaks Air Filter with Gas When Running | Lawns | |||
starting a briggs + stratton choke engine | United Kingdom | |||
Briggs & Stratton 16 HP engine-points actuating rod not moving enough ? | Lawns | |||
Briggs & Stratton Replacement Engines vs rebuilding existing engine | Lawns | |||
FS: 11 hp Briggs & Stratton engine - SOLD | North Carolina |